CB-OWSPA311GI-01 ConnectBlue, CB-OWSPA311GI-01 Datasheet - Page 54

• Manufacturer Part Number: CB-OWSPA311GI-01
• Description: KIT START OEM WIRELESS LAN RS232
• Manufacturer: ConnectBlue
• Series: OEM Serial Port Adapter™r
• Type: Bluetoothr

Specifications of CB-OWSPA311GI-01

• Frequency: 2.4GHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 809-1018

AT*AMWS Watchdog Settings
Parameters
min_time_before
min_time_after
store
Responses
<CR><LF>*AMET:<min_time_before>,
<min_time_after><CR><LF>OK<CR><LF>
<CR><LF>OK<CR><LF>
<CR><LF>ERROR<CR><LF>
Syntax
AT*AMWS=<reserved1>,
<inactivity_timeout>,
<reserved3>,
<reserved4>,
<reset>,
<store><CR>
AT*AMWS?
Parameters
reserved1
inactivity_timeout
reserved3
disconnect_reset
reset
store
Responses
<CR><LF>*AMWS:
<reserved1>,
<inactivity_timeout>,
<reserved3>,
<disconnect_reset>,
<reset><CR><LF>OK<CR><LF>
<CR><LF>OK<CR><LF>
<CR><LF>ERROR<CR><LF>
Type
Integer
Integer
Integer
Type
Integer
Integer
Integer
Integer
Integer
Integer
Description
Successful read response
Successful response
Error response
Description
50...5000ms (1000 default)
50…5000ms (1000 default)
0 = Do not store
1 = Store (will store between reboots)
Description
Reserved for future use. Use 0.
Disconnect WLAN after this long idle time in seconds (default 0, i.e. inac-
tivated)
Reserved for future use. Use 0.
Will reset the module if all peers are disconnected. 1 = On, 0 = Off, De-
fault = 0
1 Will reset the unit immediately. (Will not store nor return any response)
0 = Do not store
1 = Store (will store between reboots)
Description
Write the watchdog settings.
The watchdog functionality will disconnect from a remote peer if one of
the given conditions are met.
Read the watchdog settings
Version 1.6.6 - 2009-11
Successful response
Description
Successful read response
Error response
54