GS-BT2416C1.AT1 STMicroelectronics, GS-BT2416C1.AT1 Datasheet - Page 32

• Manufacturer Part Number: GS-BT2416C1.AT1
• Description: BLUETOOTH CLASS 1 SPP W/SOFTWARE
• Manufacturer: STMicroelectronics

Specifications of GS-BT2416C1.AT1

• Frequency: 2.4GHz
• Data Rate - Maximum: 721kbps
• Modulation Or Protocol: Bluetooth v2.1+EDR, class 1
• Applications: General Purpose
• Power - Output: 20dBm
• Sensitivity: -84dBm
• Voltage - Supply: 3.3V
• Current - Receiving: 60mA
• Current - Transmitting: 180mA
• Data Interface: PCB, Surface Mount
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: -20°C ~ 70°C
• Package / Case: Module
• Processor Series: STLC2500
• Wireless Frequency: 2.4 GHz to 2.5 GHz
• Interface Type: SPI, I2C, UART, PCM
• Data Rate: 721 Kbps
• Modulation: USB, UART, PCM, SPI, IýC
• Output Power: 100 mW
• For Use With: 497-6224 - DEMO BOARD FOR GS-BT2416C2.ATI497-6223 - DEMO BOARD FOR GS-BT2416C2.H497-5792 - BOARD DEMO FOR CLASS 1 MODULES
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Memory Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 497-5789

AT event reference
10.2
B.2
B.3
32/38
+UARTSETUP
+BTRPORT
The event is generated only in response to an AT+BTRPORTS command. A +BTRPORT
event is generated for each SPP service found on a remote device. So, for example, if a
remote device exposes two SPP ports, two different +BTRPORT events are generated.
+BTINQRES
The event is generated only in response to an AT+BTINQ command. A +BTINQRES event
is generated for each device found during an inquiry process.
Outputs the UART current configuration parameters.
Syntax: +BTRPORT: “ServiceName”, PortN
Parameters:
registered on the remote Bluetooth
PortN: An integer value representing the port number of the remote SPP service.
Syntax: +BTINQRES: BdAddress, “BdName”
Parameters:
6-byte hexadecimal value: i.e.
AT+BTINQ=00230A01F0A5
“BdName”: A string representing the name of the remote Bluetooth
Syntax: +UARTSETUP: BaudRate, DataBits, Parity, StopBits, Fc
Parameters: BaudRate: UART baud rate in bps.
Possible values are: 300, 1200, 2400, 4800, 9600 (default), 19200, 38400, 57600,
115200, 153600, 230400, 460800.
DataBits: possible values are 5, 6, 7, 8 (default)
Parity: possible values are None (default), Even, Odd
StopBits: possible values are 1 (default), 2
Fc: flow control. Possible values are None (default), Hardware
“ServiceName”: A string representing the name of the SPP service as it has been
BdAddress: Bluetooth
®
address of the remote device. This value is specified as a
®
device.
GS-BT2416C1.AT1
®
device