LMX9830SM/NOPB National Semiconductor, LMX9830SM/NOPB Datasheet - Page 34

• Manufacturer Part Number: LMX9830SM/NOPB
• Description: IC SRL PORT MOD BLUETOOTH 60FBGA
• Manufacturer: National Semiconductor

Specifications of LMX9830SM/NOPB

• Frequency: 2.4GHz
• Data Rate - Maximum: 704kbps
• Modulation Or Protocol: Bluetooth v2.0, Class 2
• Applications: PDA's, POS Terminals
• Power - Output: 0dBm
• Sensitivity: -80dBm
• Voltage - Supply: 2.5 V ~ 3.6 V
• Current - Receiving: 65mA
• Current - Transmitting: 65mA
• Data Interface: PCB, Surface Mount
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 60-FBGA
• Physical Interfaces: UART
• Data Rate: 704Kbps
• Operating Temperature Range: -40°C To +125°C
• Msl: MSL 4 - 72 Hours
• Supply Voltage Range: 1.6V To 3.6V
• Frequency Max: 2480MHz
• Termination Type: SMD
• Rohs Compliant: Yes
• Filter Terminals: SMD
• Frequency Min: 2402MHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Memory Size: -
• Lead Free Status / Rohs Status: Compliant
• Other names: *LMX9830SM; *LMX9830SM/NOPB; LMX9830SM

www.national.com
Command
Set Port Config
Get Port Config
SPP Get Port Status
SPP Port Set DTR
SPP Port Set RTS
SPP Port BREAK
SPP Port Overrun Error
SPP Port Parity Error
SPP Port Framing Error
Command
Read Local Name
Write Local Name
Read Local BDADDR
Change Local BDADDR
Store Class of Device
Set Scan Mode
Get Fixed Pin
Set Fixed Pin
Get Security Mode
Set Security Mode
Remove Pairing
List Paired Devices
Set Default Link Timeout
Get Default Link Timeout
Force Master Role
Command
Store generic SDP Record
Enable SDP Record
Delete All SDP Records
Ports to Open
Store SDP Record Confirm
Enable SDP Record Confirm
Delete All SDP Records Confirm
Ports to Open Confirmed
Read Local Name Confirm
Write Local Name Confirm
Read Local BDADDR Confirm
Change Local BDADDR Confirm
Store Class of Device Confirm
Set Scan Mode Confirm
Set Scan Mode Indication
Get Fixed Pin Confirm
Set Fixed Pin Confirm
PIN request
Get Security Mode Confirm
Set Security Mode Confirm
Remove Pairing Confirm
List of Paired Devices
Set Default Link Timeout Confirm
Get Default Link Timeout Confirm
Force Master Role Confirm
Set Port Config Confirm
Get Port Config Confirm
Port Config Changed
SPP Get Port Status Confirm
SPP Port Set DTR Confirm
SPP Port Set RTS Confirm
SPP Port BREAK
SPP Port Overrun Error Confirm
SPP Port Parity Error Confirm
SPP Port Framing Error Confirm
SPP Port Status Changed
TABLE 35. Local Service Database Configuration
TABLE 33. SPP Port Configuration and Status
TABLE 34. Local Bluetooth Settings
Event
Event
Event
34
Create a new service record within the service database
Enable or disable SDP records
Specify the RFComm Ports to open on startup
Set port setting for the virtual serial port link over the air
Read the actual port settings for a virtual serial port
Notification if port settings were changed from remote
device
Returns status of DTR, RTS (for the active RFComm link)
Sets the DTR bit on the specified link
Sets the RTS bit on the specified link
Indicates that the host has detected a break
Used to indicate that the host has detected an overrun error
Host has detected a parity error
Host has detected a framing error
Indicates that remote device has changed one of the port
status bits
Read actual friendly name of the device
Set the friendly name of the device
Note: The BDADDR has to be obtained from the IEEE
organization. See http://standarts.ieee.org/regauth/oui/
Change mode for discoverability and connectability
Reports end of Automatic limited discoverable mode
Reads current PinCode stored within the device
Set the local PinCode
A PIN code is requested during authentication of an ACL
link
Get actual Security mode
Configure Security mode for local device (default 2)
Remove pairing with a remote device
Get list of paired devices stored in the LMX9830 data
memory
Store default link supervision timeout
Get stored default link supervision timeout
Enables/Disables the request for master role at incoming
connections
Description
Description
Description