CLRC63201T/0FE,112 NXP Semiconductors, CLRC63201T/0FE,112 Datasheet - Page 3

• Manufacturer Part Number: CLRC63201T/0FE,112
• Description: IC I.CODE HS READER 32-SOIC
• Manufacturer: NXP Semiconductors
• Series: I-Coder

Specifications of CLRC63201T/0FE,112

• Rf Type: Read Only
• Frequency: 13.56MHz
• Features: ISO14443-A, ISO14443-B, ISO15693, ISO18000-3
• Package / Case: 32-SOIC (0.300", 7.50mm Width)
• Product: RFID Readers
• Operating Temperature Range: - 25 C to + 85 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 568-2199-5; 935269690112; CLRC632; CLRC63201TD

Philips Semiconductors
Multiple Protocol Contactless Reader IC
1 INTRODUCTION
1.1 Scope
The CL RC632 is member of a new family of
highly integrated reader ICs for contactless
communication at 13.56 MHz. This reader IC
family utilises an outstanding modulation and
demodulation concept completely integrated for all
kinds of passive contactless communication
methods and protocols at 13.56 MHz. The CL
RC632 is pin- compatible to the MF RC500, the
MF RC530, the MF RC531 and the SL RC400.
The Philips IC CL RC632 supports all layers of the
ISO/IEC 14443A/B communication scheme, given
correct implementation of additional components,
like oscillator, power supply, coil etc. and provided
that standardised protocols, e.g. like ISO/IEC
14443-4 and/or ISO/IEC 14443 type B
anticollision are correctly implemented. The use of
this Philips IC according to ISO14443 Type B
might infringe third party patent rights.
A purchaser of this Philips IC has to take care
for appropriate third party patent licenses.
The CL RC632 supports contactless
communication using MIFARE
The receiver part provides a robust and efficient
implementation of a demodulation and decoding
circuitry for signals from ISO/IEC 14443
compatible transponders.
The digital part handles the complete ISO/IEC
14443 framing and error detection (Parity & CRC).
Additionally it supports the fast MIFARE
security algorithm to authenticate MIFARE
Classic (e.g. MIFARE
products.
The CL RC632 supports all layers of I CODE1
and ISO/IEC 15693.
The receiver part provides a robust and efficient
implementation of a demodulation and decoding
circuitry for signals from I CODE1 and ISO/IEC
15693 compatible transponders.
The digital part handles I CODE1 and ISO/IEC
15693 framing and error detection (CRC).
The internal transmitter part is able to drive an
antenna designed for proximity operating distance
(up to 100 mm) directly without additional active
circuitry.
A comfortable parallel interface, which can be
directly connected to any 8-bit µ-Processor gives
high flexibility for the reader/terminal design.
®
Standard, MIFARE
®
Higher Baudrates.
®
Classic
®
Light)
3
Additionally a SPI compatible interface is
supported
1.2 Features
Highly integrated analog circuitry to
demodulate and decode card response
Buffered output drivers to connect an antenna
with minimum number of external components
Proximity operating distance (up to 100 mm)
Supports ISO/IEC 14443 A & B
Supports MIFARE
and supports MIFARE
Supports contactless communication with
higher baudrates up to 424kHz
Crypto1 and secure non-volatile internal key
memory
Supports I CODE1 and ISO/IEC 15693
Pin-compatible to the MF RC500, MF RC530,
MF RC531and the SL RC400
Parallel µ-Processor interface with internal
address latch and IRQ line
SPI compatible interface
Flexible interrupt handling
Automatic detection of the used µ-Processor
interface type
Comfortable 64 byte send and receive FIFO-
buffer
Hard reset with low power function
Power down mode per software
Programmable timer
Unique serial number
Bit- and byte-oriented framing
Internal oscillator buffer to connect 13.56 MHz
quartz, optimised for low phase jitter
3.3 V to 5 V operation for transmitter (antenna
driver) in short range and proximity
applications
3.3 V or 5V operation for the digital part
Short Form Specification Rev. 3.2 April 2005
®
Dual Interface Card ICs
®
Classic protocol
CL RC632
PUBLIC