WM8510GEDS/RV Wolfson Microelectronics, WM8510GEDS/RV Datasheet - Page 5

• Manufacturer Part Number: WM8510GEDS/RV
• Description: Audio CODECs VolP MONO CODEC 28-pin
• Manufacturer: Wolfson Microelectronics

Specifications of WM8510GEDS/RV

• Operating Supply Voltage: - 0.3 V to + 7 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Package / Case: SSOP-28
• Minimum Operating Temperature: - 25 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PARAMETER
Digital supply range (Core)
Digital supply range (Buffer)
Analogue supplies range
Speaker supply
Ground
Production Data
ABSOLUTE MAXIMUM RATINGS
Absolute Maximum Ratings are stress ratings only. Permanent damage to the device may be caused by continuously
operating at or beyond these limits. Device functional operating limits and guaranteed performance specifications are given
under Electrical Characteristics at the test conditions specified.
Wolfson tests its package types according to IPC/JEDEC J-STD-020B for Moisture Sensitivity to determine acceptable storage
conditions prior to surface mount assembly. These levels are:
MSL1 = unlimited floor life at <30°C / 85% Relative Humidity. Not normally stored in moisture barrier bag.
MSL2 = out of bag storage for 1 year at <30°C / 60% Relative Humidity. Supplied in moisture barrier bag.
MSL3 = out of bag storage for 168 hours at <30°C / 60% Relative Humidity. Supplied in moisture barrier bag.
The Moisture Sensitivity Level for each package type is specified in Ordering Information.
DBVDD, DCVDD, AVDD supply voltages
SPKVDD supply voltage
Voltage range digital inputs
Voltage range analogue inputs
Operating temperature range, T
Storage temperature after soldering
Notes
1.
2.
3.
RECOMMENDED OPERATING CONDITIONS
Notes
1. DCVDD ≤ DBVDD at all times.
w
Analogue and digital grounds must always be within 0.3V of each other.
All digital and analogue supplies are completely independent from each other.
When using the PLL, DCVDD should be ≥ 1.9V
ESD Sensitive Device. This device is manufactured on a CMOS process. It is therefore generically susceptible to
damage from excessive static voltages. Proper ESD precautions must be taken during handling and storage of this
device.
CONDITION
A
DGND,AGND, SPKGND
SPKVDD
SYMBOL
DCVDD
DBVDD
AVDD
CONDITIONS
TEST
DGND -0.3V
AGND -0.3V
-40°C
-65°C
-0.3V
-0.3V
1.71
1.71
MIN
MIN
2.5
2.5
TYP
0
PD, Rev 4.5, September 2008
DVDD +0.3V
AVDD +0.3V
MAX
3.6
3.6
3.6
5.5
+150°C
+3.63V
+85°C
MAX
+7V
WM8510
UNIT
V
V
V
V
V
5