DSPIC30F3013-20I/ML Microchip Technology, DSPIC30F3013-20I/ML Datasheet - Page 3

• Manufacturer Part Number: DSPIC30F3013-20I/ML
• Description: IC,DSP,16-BIT,CMOS,LLCC,44PIN,PLASTIC
• Manufacturer: Microchip Technology
• Series: dsPIC™ 30Fr

Specifications of DSPIC30F3013-20I/ML

• Rohs Compliant: YES
• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 20 MIPS
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 20
• Program Memory Size: 24KB (8K x 24)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 5.5 V
• Data Converters: A/D 10x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-QFN
• Package: 44QFN EP
• Device Core: dsPIC
• Family Name: dsPIC30
• Maximum Speed: 20 MHz
• Operating Supply Voltage: 3.3|5 V
• Data Bus Width: 16 Bit
• Number Of Programmable I/os: 30
• Interface Type: I2C/SPI/UART
• On-chip Adc: 10-chx12-bit
• Number Of Timers: 3
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DV164033 - KIT START EXPLORER 16 MPLAB ICD2DM240001 - BOARD DEMO PIC24/DSPIC33/PIC32
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: DSPIC30F301320IML

High-Performance Modified RISC CPU:
• Modified Harvard architecture
• C compiler optimized instruction set architecture
• Flexible addressing modes
• 83 base instructions
• 24-bit wide instructions, 16-bit wide data path
• Up to 24 Kbytes on-chip Flash program space
• Up to 2 Kbytes of on-chip data RAM
• Up to 1 Kbytes of nonvolatile data EEPROM
• 16 x 16-bit working register array
• Up to 30 MIPS operation:
• Up to 21 interrupt sources:
DSP Features:
• Dual data fetch
• Modulo and Bit-Reversed modes
• Two 40-bit wide accumulators with optional
• 17-bit x 17-bit single-cycle hardware fractional/
• All DSP instructions are single cycle
• Single-cycle ±16 shift
© 2010 Microchip Technology Inc.
Note:
- DC to 40 MHz external clock input
- 4 MHz - 10 MHz oscillator input with
- 8 user-selectable priority levels
- 3 external interrupt sources
- 4 processor trap sources
saturation logic
integer multiplier
- Multiply-Accumulate (MAC) operation
PLL active (4x, 8x, 16x)
This data sheet summarizes features of
this group of dsPIC30F devices and is not
intended to be a complete reference
source. For more information on the CPU,
peripherals, register descriptions and
general device functionality, refer to the
“dsPIC30F Family Reference Manual”
(DS70046). For more information on the
device instruction set and programming,
refer to the “16-bit MCU and DSC
Programmer’s
(DS70157).
High-Performance, 16-bit Digital Signal Controllers
Reference
dsPIC30F2011/2012/3012/3013
Manual”
Peripheral Features:
• High-current sink/source I/O pins: 25 mA/25 mA
• Three 16-bit timers/counters; optionally pair up
• 16-bit Capture input functions
• 16-bit Compare/PWM output functions
• 3-wire SPI modules (supports four Frame modes)
• I
• Up to two addressable UART modules with FIFO
Analog Features:
• 12-bit Analog-to-Digital Converter (ADC) with:
• Programmable Low-Voltage Detection (PLVD)
• Programmable Brown-out Reset
Special Microcontroller Features:
• Enhanced Flash program memory:
• Data EEPROM memory:
• Self-reprogrammable under software control
• Power-on Reset (POR), Power-up Timer (PWRT)
• Flexible Watchdog Timer (WDT) with on-chip
• Fail-Safe Clock Monitor operation:
• Programmable code protection
• In-Circuit Serial Programming™ (ICSP™)
• Selectable Power Management modes:
CMOS Technology:
• Low-power, high-speed Flash technology
• Wide operating voltage range (2.5V to 5.5V)
• Industrial and Extended temperature ranges
• Low-power consumption
16-bit timers into 32-bit timer modules
and 7-bit/10-bit addressing
buffers
- 200 ksps conversion rate
- Up to 10 input channels
- Conversion available during Sleep and Idle
- 10,000 erase/write cycle (min.) for
- 100,000 erase/write cycle (min.) for
and Oscillator Start-up Timer (OST)
low-power RC oscillator for reliable operation
- Detects clock failure and switches to on-chip
- Sleep, Idle and Alternate Clock modes
2
C™ module supports Multi-Master/Slave mode
industrial temperature range, 100K (typical)
industrial temperature range, 1M (typical)
low-power RC oscillator
DS70139G-page 3