CQM1-CIF01 Omron, CQM1-CIF01 Datasheet - Page 84

• Manufacturer Part Number: CQM1-CIF01
• Description: PERIPHERAL CABLE FOR NEC COMP.
• Manufacturer: Omron

Specifications of CQM1-CIF01

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Editing Speed Settings
4-5
4-5-1
4-5-2
To Clear to Default
Settings
To Copy Axes
Editing Speed Settings
Speed Setting Editing Window
Editing Speed Settings
1,2,3...
1,2,3...
Note The speeds set above can be set as interpolation speeds. Make sure, how-
On the project tree, either double-click Edit Speeds, or select it and press the
Enter Key.
Example: The following will be displayed as the 4-axis Position Control Unit
Speed Setting Editing Window.
The speed setting range is from 00000000 to 000F4240 Hex (0 to 1,000,000)
(pps). If the pulse rate is set to a value other than 1, the value displayed will
change to specified set value times the pulse rate. Refer to 4-2-2 Editing Set-
tings for editing methods.
ever, that the maximum speed of individual axes does not exceed 500,000
(pps) or the maximum speed set in the parameter settings.
Example: The following will be displayed as the Speed Setting Editing Win-
dow.
Use the following procedure to clear specific settings to their default values.
(Refer to 4-2-4 Clearing Settings for details.)
1. In the Speed Setting Editing Window, select the settings to be cleared to
2. Select Edit - Clear.
For 2-axis and 4-axis Position Control Units, data can be copied from one axis
to another axis by selecting the source and destination axes. (Refer to 4-2-5
Copying Axis Settings for details.)
1. Select Edit - Copy Axis.
2. Under From and To, select the axes to be copied from and to respectively.
3. Click the OK Button.
their default values, or designate the range by clicking and dragging.
Section 4-5
63