CP-BNCPC-017 Emerson Network Power, CP-BNCPC-017 Datasheet - Page 211

• Manufacturer Part Number: CP-BNCPC-017
• Manufacturer: Emerson Network Power
• Type: BNCr

Specifications of CP-BNCPC-017

• Gender: RCP
• Body Style: Right Angle
• Terminate To: PCB
• Mounting Style: Through Hole
• Termination: Solder
• Operating Temp Range: -55C to 85C
• Operating Frequency: 0 to 4
• Body Plating: Nickel
• Contact Plating: Gold
• Contact Material: Brass/BeCu
• Body Material: Zinc/Brass
• Impedance: 50Ohm
• Lead Free Status / RoHS Status: Compliant

MMCX Straight Plug for RG-316, RG-179
and RG-316 DS Size Flexible Cable
Connectivity Solutions
Tel: [phone]
•
Fax: [phone]
1. Identify connector parts. (3 piece parts)
2. Strip cable jacket to dimensions shown. Do not nick braid or
3. Assemble contact onto cable as shown.
4. Slide body assembly over contact and under braid, then seat
Assembly Instructions
center conductor during strip operations. Tin center conductor if
contact will be solder attached. Do not tin center conductor if
contact is to be crimp attached. Slide crimp sleeve onto cable
jacket.
Solder attachment: Solder contact to center conductor. Care
should be taken that excess solder is not applied.
Crimp attachment: Crimp contact to center conductor using
Johnson hand tool 140-0000-952 and die set 140-0000-953.
Crimp location should be centered between end of contact and
cross-hole. Crimp attachment to solid center conductor cables
is not recommended.
firmly onto contact as shown. The body assembly will “snap”
over the contact barb. The cable may have to be held in a soft
jawed clamping fixture. Slide crimp sleeve forward and crimp
using recommended crimp die hex.
•
www.EmersonNetworkPower.com/connectivity
RG-316/U, 188, 161, 174
INCHES (MILLIMETERS) • CUSTOMER DRAWINGS AVAILABLE ON REQUEST
CABLE GROUP
188 DS, 187 DS
RG-179/U, 187
RG-316 DS,
135-3403-001
135-3404-001
135-3433-001
PART NO.
CRIMP HEX
.128 (3.25)
.151 (3.83)
.128 (3.25)
211