CP-BNCPC-017 Emerson Network Power, CP-BNCPC-017 Datasheet - Page 223

• Manufacturer Part Number: CP-BNCPC-017
• Manufacturer: Emerson Network Power
• Type: BNCr

Specifications of CP-BNCPC-017

• Gender: RCP
• Body Style: Right Angle
• Terminate To: PCB
• Mounting Style: Through Hole
• Termination: Solder
• Operating Temp Range: -55C to 85C
• Operating Frequency: 0 to 4
• Body Plating: Nickel
• Contact Plating: Gold
• Contact Material: Brass/BeCu
• Body Material: Zinc/Brass
• Impedance: 50Ohm
• Lead Free Status / RoHS Status: Compliant

SMA Solder Type Straight
Plugs for Semi-Rigid Cable
Connectivity Solutions
Tel: [phone]
•
Fax: [phone]
Assembly Instructions
•
www.EmersonNetworkPower.com/connectivity
INCHES (MILLIMETERS) • CUSTOMER DRAWINGS AVAILABLE ON REQUEST
1. Identify connector parts. (2 piece parts)
2. Strip cable to dimensions shown. Do not nick
3. Insert cable into body making sure cable
4. Thread coupling nut over body.
center conductor. Bevel the cable center con-
ductor per contact detail of SMA interface on
page 24. Slide coupling nut onto cable as
shown.
jacket is flush with front of body. Solder body
to cable. Use a minimum amount of heat to
minimize cable insulation movement. Trim
expanded insulation flush with front of body
or fixture body and cable during soldering to
prevent cable insulation expansion.
(.141 Semi-Rigid)
CABLE GROUP
RG-402/U
142-0694-011
142-0694-016
PART NO.
223