CP-BNCPC-017 Emerson Network Power, CP-BNCPC-017 Datasheet - Page 231

• Manufacturer Part Number: CP-BNCPC-017
• Manufacturer: Emerson Network Power
• Type: BNCr

Specifications of CP-BNCPC-017

• Gender: RCP
• Body Style: Right Angle
• Terminate To: PCB
• Mounting Style: Through Hole
• Termination: Solder
• Operating Temp Range: -55C to 85C
• Operating Frequency: 0 to 4
• Body Plating: Nickel
• Contact Plating: Gold
• Contact Material: Brass/BeCu
• Body Material: Zinc/Brass
• Impedance: 50Ohm
• Lead Free Status / RoHS Status: Compliant

SMA Crimp Type Straight Plugs, Straight Jacks,
and Straight Bulkhead Jacks for Flexible Cable
Connectivity Solutions
Tel: [phone]
•
Fax: [phone]
Assembly Instructions
•
www.EmersonNetworkPower.com/connectivity
1. Identify connector parts. (6 piece parts–except
2. Strip cable to dimensions shown. Do not nick braid
3. Flare braid and slide cable into crimp stem. Place
4. Arrange braid uniformly around crimp stem. Slide
INCHES (MILLIMETERS) • CUSTOMER DRAWINGS AVAILABLE ON REQUEST
bulkhead)
or center conductor. A wire stripper of correct size
is recommended for this step. Twist stranded center
conductor into tight bundle and tin (optional). Slide
crimp sleeve, nut and heat shrink tubing (as appli-
cable) onto cable as shown.
rear insulator and center contact over center con-
ductor and position as shown for different cable
sizes. Solder center conductor to contact through
the solder hole. Solder must not be allowed to
gather and run on outside of contact. Use a mini-
mum amount of solder for a good joint. .020 (0.51)
diameter solder is recommended.
crimp sleeve over braid and crimp securely using
recommended crimp tool. Slide center contact as-
sembly into connector body. Thread coupling nut
onto body and tighten to 10 in.-lb. torque. Slide heat
shrink forward and shrink (as applicable).
CABLE GROUP
RG-316/U, 161,
RG-316/U, 161,
RG-55/U, 142,
RG-316 DS,
RG-178/U,
RG-58/U,
141, 303
223, 400
174, 188
174, 188
188 DS
196
142-0302-401
142-0302-406
142-0303-401
142-0303-406
142-0304-401
142-0304-406
142-0307-401
142-0307-406
142-0308-401
142-0308-406
142-0403-001
142-0403-006
PART NO.
CRIMP HEX
.105 (2.67)
.105 (2.67)
.128 (3.25)
.128 (3.25)
.151 (3.83)
.151 (3.83)
.213 (5.41)
.213 (5.41)
.213 (5.41)
.213 (5.41)
.128 (3.25)
.128 (3.25)
231