CP-BNCPC-017 Emerson Network Power, CP-BNCPC-017 Datasheet - Page 237

• Manufacturer Part Number: CP-BNCPC-017
• Manufacturer: Emerson Network Power
• Type: BNCr

Specifications of CP-BNCPC-017

• Gender: RCP
• Body Style: Right Angle
• Terminate To: PCB
• Mounting Style: Through Hole
• Termination: Solder
• Operating Temp Range: -55C to 85C
• Operating Frequency: 0 to 4
• Body Plating: Nickel
• Contact Plating: Gold
• Contact Material: Brass/BeCu
• Body Material: Zinc/Brass
• Impedance: 50Ohm
• Lead Free Status / RoHS Status: Compliant

SMB/SMC Solder Type Straight Plugs
and Jacks for Semi-Rigid Cable
Connectivity Solutions
Tel: [phone]
•
Fax: [phone]
Assembly Instructions
1. Identify connector parts. (2 piece parts–except bulkhead)
2. Strip cable to dimensions shown. Do not nick center
3. Insert cable into body making certain that the cable
4. Slide cover sleeve over access ports and solder body to
conductor. Slide cover sleeve onto cable as shown.
insulation bottoms on center contact. Solder center
conductor to contact through the side access ports and
hole in center contact. Use a minimum amount of solder
for a good joint. .020 (0.51) diameter solder is
recommended.
cable and cover sleeve to body. Use a minimum amount
of heat to minimize cable insulation movement.
•
www.EmersonNetworkPower.com/connectivity
(.086 Semi-Rigid)
(.141 Semi-Rigid)
(.086 Semi-Rigid)
INCHES (MILLIMETERS) • CUSTOMER DRAWINGS AVAILABLE ON REQUEST
CABLE GROUP
RG-405/U
RG-402/U
RG-405/U
131-3593-401/406
131-3693-001/016
131-3694-401/406
131-6593-401/406
PART NO.
.025 (0.64)
.025 (0.64)
.050 (1.27)
.025 (0.64)
“L”
237