CSTCR4M00G53Z-R0 Murata Electronics North America, CSTCR4M00G53Z-R0 Datasheet - Page 16

• Manufacturer Part Number: CSTCR4M00G53Z-R0
• Description: RESONATOR 4.00MHZ CERAMIC INDUST
• Manufacturer: Murata Electronics North America
• Series: CERALOCK®, CSTCRr
• Type: Ceramicr

Specifications of CSTCR4M00G53Z-R0

• Frequency: 4MHz
• Features: Built in Capacitor
• Frequency Stability: ±0.2%
• Frequency Tolerance: ±0.5%
• Impedance: 60 Ohm
• Capacitance: 15pF
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: 3-SMD, Non-Standard
• Size / Dimension: 0.177" L x 0.079" W (4.50mm x 2.00mm)
• Height: 0.045" (1.15mm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 490-1217-2

3
Note
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
sales representatives or product engineers before ordering.
■
14
The frequency stability of CERALOCK
of crystal and LC or RC oscillators. Temperature
stability is ±0.3 to ±0.5% against initial values within
-20 to +80°C. The initial frequency precision is
±0.5% for standard products. The frequency of the
standard CERALOCK
measuring circuit, but the oscillation frequency may
shift when used in the actual IC circuit. Usually, if the
frequency precision needed for clock signal of a 1 chip
microcomputer is approximately ±2 to 3% under
working conditions, CERALOCK
used in most cases. If exact oscillation frequency is
required for a special purpose, Murata can manufacture
the ceramic resonator for the desired frequency.
The following are the general electrical specifications of
CERALOCK
oscillation frequency, please refer to the next chapter
“Application to Typical Oscillation Circuits”.)
Electrical Specifications of kHz Band CSBLA
Series
Electrical specifications of CSBLA series are shown in
the tables. The value of load capacitance (C
damping resistance (Rd) depend on the frequency. (The
initial frequency tolerance of standard CSBLA□ J type
is ±0.5% max.)
Part Number
1. Electrical Specifications
Frequency Specifications of CSBLA Series
CSBLA Series
(with MOS IC/
3
H–CMOS IC)
Specifications of CERALOCK
Item
®
. (As for the standard measuring circuit of
Frequency (kHz)
700–1250
375–699
®
is adjusted by the standard
®
Initial Tolerance of
standard type can be
Oscillation
Frequency
±2kHz
±0.5%
®
is between that
L1
, C
L2
Temperature Stability of
Oscillation Frequency
) and
(-20 to +80°C)
±0.3%
■
Resonant Impedance Specifications of CSBLA Series
Frequency Aging
Oscillating
Frequency Range (kHz)
±0.3%
0375–0450
0451–0504
0505–0799
0800–0899
0900–1099
1100–1250
C
L1
IC
V
DD
X
IC
Rd
C
L2
Oscillation Frequency
Standard Circuit for
C
Resonant Impedance (Ω max.)
L1
Output
, C
L2
, Rd : Depends on frequency
V
®
IC :
DD
IC : CD4069UBE(RCA)
IC :
IC
X : CERALOCK
: TC74HCU04(TOSHIBA)
: +5V
:(cf. Fig. 4-2, 4-3)
(MOS)
(H-CMOS)
120
130
140
160
100
120
®
P17E.pdf
10.8.3