AD8188ARUZ Analog Devices Inc, AD8188ARUZ Datasheet - Page 21

• Manufacturer Part Number: AD8188ARUZ
• Description: IC,ANALOG MUX,TRIPLE,2-CHANNEL,TSSOP,24PIN,PLASTIC
• Manufacturer: Analog Devices Inc
• Type: Analog Multiplexerr

Specifications of AD8188ARUZ

• Function: Multiplexer
• Circuit: 3 x 2:1
• On-state Resistance: 350 mOhm
• Voltage Supply Source: Single Supply
• Voltage - Supply, Single/dual (±): 3.5 V ~ 5.5 V
• Current - Supply: 15mA
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 24-TSSOP (0.173", 4.40mm Width)
• Package: 24TSSOP
• Multiplexer Architecture: 2:1
• Maximum Turn-off Time: 17(Typ)@5V ns
• Maximum Turn-on Time: 4(Typ)@5V ns
• Power Supply Type: Single
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

EVALUATION BOARD
An evaluation board has been designed and is offered for
running the AD8188/AD8189 on a single supply. The inputs
and outputs are ac-coupled and terminated with 75 Ω resistors.
For the AD8189, a potentiometer is provided to allow setting
V
REF
at any value between V
CC
and ground.
Figure 57. Component Side Board Layout
Figure 58. Circuit Side Board Layout
Rev. 0 | Page 21 of 24
The logic control signals can be statically set by adding or
removing a jumper. If a fast signal is required to drive the logic
pins, an SMA connector can be used to deliver the signal, and a
place for a termination resistor is provided.
AD8188/AD8189