TDA8784HLBE-T NXP Semiconductors, TDA8784HLBE-T Datasheet - Page 25

• Manufacturer Part Number: TDA8784HLBE-T
• Description: Audio A/D Converter ICs 10BIT A/D INTERFACE CCD CAMERA
• Manufacturer: NXP Semiconductors

Specifications of TDA8784HLBE-T

• Conversion Rate: 18000 KSPS
• Resolution: 10 Bit
• Operating Supply Voltage: 3 V or 5 V
• Maximum Operating Temperature: + 75 C
• Minimum Operating Temperature: - 20 C
• Package / Case: LQFP-48
• Mounting Style: SMD/SMT
• Number Of Channels: 1
• Supply Current: 1 mA or 18 mA or 78 mA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: TDA8784HL/C4,518

Philips Semiconductors
Suitability of surface mount IC packages for wave and reflow soldering methods
Notes
1. For more detailed information on the BGA packages refer to the “(LF)BGA Application Note ” (AN01026); order a copy
2. All surface mount (SMD) packages are moisture sensitive. Depending upon the moisture content, the maximum
3. These packages are not suitable for wave soldering. On versions with the heatsink on the bottom side, the solder
4. If wave soldering is considered, then the package must be placed at a 45 angle to the solder wave direction.
5. Wave soldering is suitable for LQFP, TQFP and QFP packages with a pitch (e) larger than 0.8 mm; it is definitely not
6. Wave soldering is suitable for SSOP and TSSOP packages with a pitch (e) equal to or larger than 0.65 mm; it is
2002 Oct 23
BGA, LBGA, LFBGA, SQFP, TFBGA, VFBGA
HBCC, HBGA, HLQFP, HSQFP, HSOP, HTQFP, HTSSOP, HVQFN,
HVSON, SMS
PLCC
LQFP, QFP, TQFP
SSOP, TSSOP, VSO
18 Msps, 10-bit analog-to-digital
interface for CCD cameras
from your Philips Semiconductors sales office.
temperature (with respect to time) and body size of the package, there is a risk that internal or external package
cracks may occur due to vaporization of the moisture in them (the so called popcorn effect). For details, refer to the
Drypack information in the “Data Handbook IC26; Integrated Circuit Packages; Section: Packing Methods” .
cannot penetrate between the printed-circuit board and the heatsink. On versions with the heatsink on the top side,
the solder might be deposited on the heatsink surface.
The package footprint must incorporate solder thieves downstream and at the side corners.
suitable for packages with a pitch (e) equal to or smaller than 0.65 mm.
definitely not suitable for packages with a pitch (e) equal to or smaller than 0.5 mm.
(4)
, SO, SOJ
PACKAGE
(1)
25
not suitable
not suitable
suitable
not recommended
not recommended
WAVE
(3)
SOLDERING METHOD
(4)(5)
(6)
suitable
suitable
suitable
suitable
suitable
Product specification
REFLOW
TDA8784
(2)