PIC16LF1847T-I/SO Microchip Technology, PIC16LF1847T-I/SO Datasheet - Page 132

• Manufacturer Part Number: PIC16LF1847T-I/SO
• Description: 14 KB Flash, 1K Bytes RAM, 32 MHz Int. Osc, 16 I/0, Enhanced Mid Range Core, Nan
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ mTouch™ 16Fr

Specifications of PIC16LF1847T-I/SO

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 32MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 14KB (8K x 14)
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 18-SOIC (0.295", 7.50mm Width)
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PIC16(L)F1847
REGISTER 13-1:
REGISTER 13-2:
REGISTER 13-3:
DS41453B-page 132
bit 7
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
bit 7-0
bit 7
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
bit 7-0
bit 7
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
bit 7-0
R/W/HS-0/0
R/W-0/0
IOCBP7
R/W-0/0
IOCBN7
IOCBF7
IOCBP<7:0>: Interrupt-on-Change Positive Edge Enable bits
1 = Interrupt-on-change enabled on the pin for a positive going edge. Associated Status bit and
0 = Interrupt-on-change disabled for the associated pin.
IOCBN<7:0>: Interrupt-on-Change Negative Edge Enable bits
1 = Interrupt-on-change enabled on the pin for a negative going edge. Associated Status bit and
0 = Interrupt-on-change disabled for the associated pin.
IOCBF<7:0>: Interrupt-on-Change Flag bits
1 = An enabled change was detected on the associated pin.
0 = No change was detected, or the user cleared the detected change.
R/W/HS-0/0
R/W-0/0
IOCBP6
R/W-0/0
IOCBN6
IOCBF6
Set when IOCBPx = 1 and a rising edge was detected on RBx, or when IOCBNx = 1 and a falling
edge was detected on RBx.
interrupt flag will be set upon detecting an edge.
interrupt flag will be set upon detecting an edge.
IOCBP: INTERRUPT-ON-CHANGE POSITIVE EDGE REGISTER
IOCBN: INTERRUPT-ON-CHANGE NEGATIVE EDGE REGISTER
IOCBF: INTERRUPT-ON-CHANGE FLAG REGISTER
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
R/W/HS-0/0 R/W/HS-0/0 R/W/HS-0/0
R/W-0/0
IOCBP5
R/W-0/0
IOCBN5
IOCBF5
R/W-0/0
IOCBP4
R/W-0/0
IOCBN4
IOCBF4
Preliminary
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
HS - Bit is set in hardware
IOCBP3
IOCBN3
R/W-0/0
R/W-0/0
IOCBF3
R/W/HS-0/0
IOCBN2
R/W-0/0
IOCBP2
R/W-0/0
IOCBF2
 2011 Microchip Technology Inc.
R/W/HS-0/0
IOCBN1
R/W-0/0
IOCBP1
R/W-0/0
IOCBF1
R/W/HS-0/0
R/W-0/0
IOCBP0
R/W-0/0
IOCBN0
IOCBF0
bit 0
bit 0
bit 0