PIC18LF13K22-E/SO Microchip Technology, PIC18LF13K22-E/SO Datasheet - Page 23

• Manufacturer Part Number: PIC18LF13K22-E/SO
• Description: 8KB Flash, 256bytes RAM, 256bytes EEPROM, 16MIPS, NanoWatt XLP 20 SOIC .300in TU
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18LF13K22-E/SO

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 17
• Program Memory Size: 8KB (4K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 20-SOIC (7.5mm Width)
• Processor Series: PIC18LF
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 256 B
• Interface Type: EUSART, I2C, SPI
• Maximum Clock Frequency: 32 KHz
• Number Of Programmable I/os: 18
• Number Of Timers: 4
• Operating Supply Voltage: 1.8 V to 3.6 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 12 Channel
• A/d Bit Size: 10 bit
• A/d Channels Available: 12
• Height: 2.05 mm
• Length: 12.8 mm
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 1.8 V, 2.7 V
• Width: 7.5 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

5.2
The verify step involves reading back the program
Flash space and comparing it against the copy held in
the programmer’s buffer. Memory reads occur a single
byte at a time, so two bytes must be read to compare
against the word in the programmer’s buffer. Refer to
Section 5.1 “Read Program Flash, ID Locations and
Configuration Bits” for implementation details of
reading program Flash.
FIGURE 5-2:
© 2009 Microchip Technology Inc.
Verify Program Flash and ID
Locations
No
with Post-increment
with Post-increment
Set TBLPTR = 0
Read High Byte
Read Low Byte
Word = Expect
program Flash
verified?
data?
Does
VERIFY PROGRAM FLASH FLOW
Start
All
Yes
Yes
No
Failure,
Report
Error
Advance Information
PIC18F1XK22/LF1XK22
Increment
Pointer
The Table Pointer must be manually set to 200000h
(base address of the ID locations) once the program
Flash has been verified. The post-increment feature of
the table read 4-bit command can not be used to
increment the Table Pointer beyond the program Flash
space. In a 64-Kbyte device, for example, a post-
increment read of address FFFFh will wrap the Table
Pointer back to 000000h, rather than point to
unimplemented address, 010000h.
No
Set TBLPTR = 200000h
with Post-Increment
with Post-Increment
Read High byte
Read Low Byte
Word = Expect
ID locations
verified?
data?
Done
Does
All
Yes
Yes
No
DS41357B-page 23
Failure,
Report
Error