PIC24FV32KA302-E/SP Microchip Technology, PIC24FV32KA302-E/SP Datasheet - Page 132

• Manufacturer Part Number: PIC24FV32KA302-E/SP
• Description: 32KB Flash, 2KB RAM, 512B EEPROM, 16 MIPS, 12-bit ADC, CTMU, 5V 28 SPDIP .300in
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 24Fr

Specifications of PIC24FV32KA302-E/SP

• Processor Series: PIC24FV
• Core: PIC
• Data Bus Width: 16 bit
• Program Memory Type: Flash
• Program Memory Size: 32 KB
• Data Ram Size: 2 KB
• Maximum Operating Temperature: + 125 C
• Mounting Style: Through Hole
• Package / Case: SPDIP-28
• Development Tools By Supplier: MPLAB IDE Software
• Minimum Operating Temperature: - 40 C
• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 32MHz
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 23
• Eeprom Size: 512 x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 13x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Lead Free Status / Rohs Status: Details

PIC24FV32KA304 FAMILY
REGISTER 10-2:
DS39995B-page 132
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15-9
bit 8
bit 7
bit 6-5
bit 4
bit 3
bit 2
bit 1
bit 0
Note 1:
R/W-0, HS
DSFLT
U-0
—
2:
3:
All register bits are cleared when the DSEN (DSCON<15>) bit is set.
All register bits are reset only in the case of a POR event outside of Deep Sleep mode, except bit,
DSPOR, which does not reset on a POR event that is caused due to a Deep Sleep exit.
Unlike the other bits in this register, this bit can be set outside of Deep Sleep.
Unimplemented: Read as ‘0’
DSINT0: Interrupt-on-Change bit
1 = Interrupt-on-change was asserted during Deep Sleep
0 = Interrupt-on-change was not asserted during Deep Sleep
DSFLT: Deep Sleep Fault Detect bit
1 = A Fault occurred during Deep Sleep and some Deep Sleep configuration settings may have been
0 = No Fault was detected during Deep Sleep
Unimplemented: Read as ‘0’
DSWDT: Deep Sleep Watchdog Timer Time-out bit
1 = The Deep Sleep Watchdog Timer timed out during Deep Sleep
0 = The Deep Sleep Watchdog Timer did not time out during Deep Sleep
DSRTCC: Real-Time Clock and Calendar (RTCC) Alarm bit
1 = The Real-Time Clock and Calendar triggered an alarm during Deep Sleep
0 = The Real-Time Clock and Calendar did not trigger an alarm during Deep Sleep
DSMCLR: MCLR Event bit
1 = The MCLR pin was active and was asserted during Deep Sleep
0 = The MCLR pin was not active, or was active, but not asserted during Deep Sleep
Unimplemented: Read as ‘0’
DSPOR: Power-on Reset Event bit
1 = The V
0 = The V
U-0
U-0
corrupted
—
—
DSWAKE: DEEP SLEEP WAKE-UP SOURCE REGISTER
DD
DD
supply POR circuit was active and a POR event was detected
supply POR circuit was not active, or was active but did not detect a POR event
HS = Hardware Settable bit
W = Writable bit
‘1’ = Bit is set
U-0
U-0
—
—
R/W-0, HS
DSWDT
U-0
(2,3)
—
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
R/W-0, HS
DSRTCC
U-0
—
R/W-0, HS
DSMCLR
U-0
—
 2011 Microchip Technology Inc.
(1)
x = Bit is unknown
U-0
U-0
—
—
DSPOR
R/W-0, HS
R/W-0, HS
DSINT0
(2,3)
bit 8
bit 0