ISP1504A1ETTM STEricsson, ISP1504A1ETTM Datasheet - Page 2

• Manufacturer Part Number: ISP1504A1ETTM
• Manufacturer: STEricsson

Specifications of ISP1504A1ETTM

• Lead Free Status / RoHS Status: Compliant

3. Applications
CD00222688
Product data sheet
Highly optimized ULPI-compliant interface
Flexible system integration and very low current consumption, optimized for portable
devices
Full industrial grade operating temperature range from −40 °C to +85 °C
ElectroStatic Discharge (ESD) compliance
Available in a small TFBGA36 (3.5 mm × 3.5 mm) Restriction of Hazardous
Substances (RoHS) compliant, halogen-free and lead-free package
Digital still camera
Digital TV
Digital Versatile Disc (DVD) recorder
External storage device, for example:
Supports external charge pump or 5 V V
Complete control over bus resistors
Data line and V
Integrated V
Integrated cable (ID) detector
60 MHz, 12-bit interface between the core and the transceiver
Integrated Phase-Locked Loop (PLL) supporting input clock frequency of 19.2 MHz
for ISP1504A1, and 26 MHz for ISP1504C1
Fully programmable ULPI-compliant register set
Internal Power-On Reset (POR) circuit
Power-supply input range is 3.0 V to 4.5 V
Internal voltage regulator supplies 3.3 V and 1.8 V
Supports external V
External V
allows per-port or ganged power control
Digital FAULT input to monitor the external V
Pin CS_N/PWRDN 3-states the ULPI interface, allowing bus reuse for other
applications
Supports power-down mode when V
pin CS_N/PWRDN is HIGH
Supports wide range interfacing I/O voltage of 1.65 V to 3.6 V; separate I/O voltage
pins minimize crosstalk
Typical operating current of 11 mA to 48 mA, depending on the USB speed and
bus utilization
Typical suspend current of 50 μA
Typical power-down current of 0.5 μA
JESD22-A114D ±2 kV contact Human Body Model (HBM)
JESD22-A115-A ±200 V Machine Model (MM)
JESD22-C101-C ±500 V Charge Device Model (CDM)
Zip drive
Magneto-Optical (MO) drive
Optical drive: CD-ROM, CD-RW, CD-DVD
BUS
BUS
source is controlled using the PSW_N pin; open-drain PSW_N
BUS
voltage comparators
Rev. 04 — 20 May 2010
pulsing session request methods
BUS
charge pump or 5 V supply:
ISP1504A1; ISP1504C1
CC(I/O)
BUS
is not present or when
switch
BUS
supply status
ULPI HS USB OTG transceiver
© ST-ERICSSON 2010. All rights reserved.
2 of 78