ISP1507DBS,518 NXP Semiconductors, ISP1507DBS,518 Datasheet - Page 68

• Manufacturer Part Number: ISP1507DBS,518
• Manufacturer: NXP Semiconductors

Specifications of ISP1507DBS,518

• Number Of Transceivers: 1
• Esd Protection: YeskV
• Power Supply Requirement: Single
• Operating Supply Voltage (typ): 3.3V
• Operating Temperature Classification: Industrial
• Operating Supply Voltage (max): 3.6V
• Operating Supply Voltage (min): 3V
• Dual Supply Voltage (typ): Not RequiredV
• Dual Supply Voltage (max): Not RequiredV
• Dual Supply Voltage (min): Not RequiredV
• Mounting: Surface Mount
• Operating Temperature (max): 85C
• Operating Temperature (min): -40C
• Lead Free Status / RoHS Status: Compliant

NXP Semiconductors
ISP1507C_ISP1507D_1
Product data sheet
18.4 Reflow soldering
Key characteristics in reflow soldering are:
Table 55.
Table 56.
Moisture sensitivity precautions, as indicated on the packing, must be respected at all
times.
Studies have shown that small packages reach higher temperatures during reflow
soldering, see
Package thickness (mm)
< 2.5
Package thickness (mm)
< 1.6
1.6 to 2.5
> 2.5
•
•
•
2.5
Lead-free versus SnPb soldering; note that a lead-free reflow process usually leads to
higher minimum peak temperatures (see
reducing the process window
Solder paste printing issues including smearing, release, and adjusting the process
window for a mix of large and small components on one board
Reflow temperature profile; this profile includes preheat, reflow (in which the board is
heated to the peak temperature) and cooling down. It is imperative that the peak
temperature is high enough for the solder to make reliable solder joints (a solder paste
characteristic). In addition, the peak temperature must be low enough that the
packages and/or boards are not damaged. The peak temperature of the package
depends on package thickness and volume and is classified in accordance with
Table 55
SnPb eutectic process (from J-STD-020C)
Lead-free process (from J-STD-020C)
and
Figure
56
29.
Rev. 01 — 28 May 2008
Package reflow temperature ( C)
Volume (mm
< 350
235
220
Package reflow temperature ( C)
Volume (mm
< 350
260
260
250
3
3
)
)
ULPI HS USB host and peripheral transceiver
Figure
ISP1507C; ISP1507D
350 to 2000
260
250
245
29) than a SnPb process, thus
220
220
350
> 2000
260
245
245
© NXP B.V. 2008. All rights reserved.
67 of 74