MC9S12DG128CPVE Freescale, MC9S12DG128CPVE Datasheet - Page 120

• Manufacturer Part Number: MC9S12DG128CPVE
• Manufacturer: Freescale

Specifications of MC9S12DG128CPVE

• Cpu Family: HCS12
• Device Core Size: 16b
• Frequency (max): 50MHz
• Interface Type: SCI/SPI/I2C/CAN
• Total Internal Ram Size: 8KB
• # I/os (max): 91
• Number Of Timers - General Purpose: 8
• Operating Supply Voltage (typ): 2.5/5V
• Operating Supply Voltage (max): 2.75/5.25V
• Operating Supply Voltage (min): 2.25/2.35/4.5V
• On-chip Adc: 2(8-chx10-bit)
• Instruction Set Architecture: CISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 112
• Package Type: LQFP
• Program Memory Type: Flash
• Program Memory Size: 128KB
• Lead Free Status / RoHS Status: Compliant

Device User Guide — 9S12DT128DGV2/D V02.16
A.5.1.5 Pseudo Stop and Wait Recovery
The recovery from Pseudo STOP and Wait are essentially the same since the oscillator was not stopped in
both modes. The controller can be woken up by internal or external interrupts. After t
the CPU starts
wrs
fetching the interrupt vector.
A.5.2 Oscillator
The device features an internal Colpitts and Pierce oscillator. The selection of Colpitts oscillator or Pierce
oscillator/external clock depends on the XCLKS signal which is sampled during reset.By asserting the
XCLKS input during reset this oscillator can be bypassed allowing the input of a square wave. Before
asserting the oscillator to the internal system clocks the quality of the oscillation is checked for each start
from either power-on, STOP or oscillator fail. t
specifies the maximum time before switching to the
CQOUT
internal self clock mode after POR or STOP if a proper oscillation is not detected. The quality check also
determines the minimum oscillator start-up time t
. The device also features a clock monitor. A
UPOSC
Freescale Semiconductor
120