82V3355DKG IDT, Integrated Device Technology Inc, 82V3355DKG Datasheet - Page 28

• Manufacturer Part Number: 82V3355DKG
• Manufacturer: IDT, Integrated Device Technology Inc

Specifications of 82V3355DKG

• Function: Wan PLL
• Operating Temperature (max): 85C
• Operating Temperature (min): -40C
• Package Type: TQFP
• Pin Count: 64
• Mounting: Surface Mount
• Lead Free Status / RoHS Status: Compliant

3.9
the ones supported by T4 DPLL for T0 path is the main one. T0 DPLL
supports three primary operating modes: Free-Run, Locked and Hold-
over, and three secondary, temporary operating modes: Pre-Locked,
Pre-Locked2 and Lost-Phase. T4 DPLL supports three operating
modes: Free-Run, Locked and Holdover. The operating modes of T0
DPLL and T4 DPLL can be switched automatically or by force, as con-
trolled by the T0_OPERATING_MODE[2:0] / T4_OPERATING_
MODE[2:0] bits respectively.
switch is under external control and the status of the selected input clock
takes no effect to the operating mode selection. The forced operating
mode switch is applicable for special cases, such as testing.
state machines for T0 and for T4 automatically determine the operating
mode respectively.
Functional Description
IDT82V3355
The operating modes supported by T0 DPLL are more complex than
When the operating mode is switched by force, the operating mode
When the operating mode is switched automatically, the internal
SELECTED INPUT CLOCK STATUS VS. DPLL
OPERATING MODE
28
3.9.1
T0_OPERATING_MODE[2:0] bits, as shown in
Table 16: T0 DPLL Operating Mode Control
the internal state machine is shown in
automatically, the current operating mode is always indicated by the
T0_DPLL_OPERATING_MODE[2:0] bits. When the operating mode
switches, the T0_OPERATING_MODE
T0_OPERATING_MODE
The
When the operating mode is switched automatically, the operation of
Whether the operating mode is under external control or is switched
T0_OPERATING_MODE[2:0]
T0
T0 SELECTED INPUT CLOCK VS. DPLL OPERATING
MODE
DPLL
000
001
010
100
101
110
111
operating
2
SYNCHRONOUS ETHERNET WAN PLL
bit is ‘1’, an interrupt will be generated.
mode
Figure
T0 DPLL Operating Mode
1
Forced - Pre-Locked2
Forced - Pre-Locked
Forced - Lost-Phase
6.
Forced - Free-Run
Forced - Holdover
is
bit will be set. If the
Forced - Locked
Table
Automatic
controlled
16:
March 3, 2009
by
the