PCF8591T NXP Semiconductors, PCF8591T Datasheet - Page 11

• Manufacturer Part Number: PCF8591T
• Manufacturer: NXP Semiconductors
• Type: General Purposer

Specifications of PCF8591T

• Number Of Channels: 1
• Number Of Adc's: 1
• Number Of Dac's: 1
• Adc/dac Resolution: 8b
• Package Type: SO
• Interface Type: Serial (I2C)
• Operating Supply Voltage (typ): 3.3/5V
• Sample Rate: 11.1KSPS
• Number Of Adc Inputs: 4
• Number Of Dac Outputs: 1
• Operating Supply Voltage (max): 6V
• Operating Supply Voltage (min): 2.5V
• Operating Temperature (max): 85C
• Operating Temperature (min): -40C
• Pin Count: 16
• Mounting: Surface Mount
• Lead Free Status / RoHS Status: Not Compliant

Philips Semiconductors
7.5
For the D/A and A/D conversion either a stable external
voltage reference or the supply voltage has to be applied
to the resistor divider chain (pins V
The AGND pin has to be connected to the system analog
ground and may have a DC off-set with reference to V
A low frequency may be applied to the V
pins. This allows the use of the D/A converter as a
one-quadrant multiplier; see Chapter 15 and Fig.7.
The A/D converter may also be used as a one or two
quadrant analog divider. The analog input voltage is
divided by the reference voltage. The result is converted to
a binary code. In this application the user has to keep the
reference voltage stable during the conversion cycle.
2003 Jan 27
8-bit A/D and D/A converter
Reference voltage
REF
and AGND).
REF
and AGND
SS
.
11
7.6
An on-chip oscillator generates the clock signal required
for the A/D conversion cycle and for refreshing the
auto-zeroed buffer amplifier. When using this oscillator the
EXT pin has to be connected to V
oscillator frequency is available.
If the EXT pin is connected to V
OSC is switched to a high-impedance state allowing the
user to feed an external clock signal to OSC.
Oscillator
DD
SS
the oscillator output
. At the OSC pin the
Product specification
PCF8591