M41T83SQA6F STMicroelectronics, M41T83SQA6F Datasheet - Page 45

• Manufacturer Part Number: M41T83SQA6F
• Description: IC RTC SERIAL W/BATT SW 16QFN
• Manufacturer: STMicroelectronics
• Type: Clock/Calendar/Alarmr

Specifications of M41T83SQA6F

• Memory Size: 32B
• Time Format: HH:MM:SS:hh (24 hr)
• Date Format: YY-MM-DD-dd
• Interface: I²C, 2-Wire Serial
• Voltage - Supply: 3 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 16-QFN
• Clock Format: 12Hr / 24Hr
• Clock Ic Type: RTC
• Interface Type: I2C, Serial
• Supply Voltage Range: 3V To 5.5V
• Digital Ic Case Style: QFN
• No. Of Pins: 16
• Rohs Compliant: Yes
• For Use With: 497-10833 - DAUGHTER-CARD M41T83SQA6E QFN16
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-6887-2; M41T83SQA6F

M41T82-M41T83
3.17
OTP bit operation (M41T83 in SOX18 package only)
When the OTP (one time programmable) bit is set to a '1,' the value in the internal OTP
registers will be transferred to the analog calibration register (12h) and are “Read only.” The
OTP value is programmed by the manufacturer, and will contain the calibration value
necessary to achieve ±5 ppm at room temperature after two SMT reflows. This clock
accuracy can then be guaranteed to drift no more than ±3 ppm the first year, and ±1 ppm for
each following year due to crystal aging.
If the OTP bit is set to 0, the analog calibration register will become a WRITE/READ register
and function like standard SRAM memory cells, allowing the user to implement any desired
value of analog calibration.
When the user sets the OTP bit, they need to wait for approximately 8 ms before the analog
registers transfer the value from the OTP to the analog registers due to the OTP read
operation.
Doc ID 12578 Rev 12
Clock operation
45/61