XC56309AG100A Freescale Semiconductor, XC56309AG100A Datasheet - Page 197

• Manufacturer Part Number: XC56309AG100A
• Description: IC DSP 24BIT 100MHZ 144-TQFP
• Manufacturer: Freescale Semiconductor
• Series: DSP563xxr
• Type: Fixed Pointr

Specifications of XC56309AG100A

• Interface: Host Interface, SSI, SCI
• Clock Rate: 100MHz
• Non-volatile Memory: ROM (576 B)
• On-chip Ram: 24kB
• Voltage - I/o: 3.30V
• Voltage - Core: 3.30V
• Operating Temperature: -40°C ~ 100°C
• Mounting Type: Surface Mount
• Package / Case: 144-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

9.3 Operating Modes
Each timer has operating modes that meet a variety of system requirements, as follows:
Note:
9.3.1 Triple Timer Modes
For all triple timer modes, the following points are true:
9.3.1.1 Timer GPIO (Mode 0)
In Mode 0, the timer generates an internal interrupt when a counter value is reached, if the timer
compare interrupt is enabled (see Figure 9-3 and Figure 9-4). When the counter equals the
TCPR value, TCSR[TCF] is set and a compare interrupt is generated if the TCSR[TCIE] bit is
Freescale Semiconductor
TC3
0
Timer
— GPIO, mode 0: Internal timer interrupt generated by the internal clock
— Pulse, mode 1: External timer pulse generated by the internal clock
— Toggle, mode 2: Output timing signal toggled by the internal clock
— Event counter, mode 3: Internal timer interrupt generated by an external clock
Measurement
— Input width, mode 4: Input pulse width measurement
— Input period, mode 5: Input signal period measurement
— Capture, mode 6: Capture external signal
PWM, mode 7: Pulse width modulation
Watchdog
— Pulse, mode 9: Output pulse, internal clock
— Toggle, mode 10: Output toggle, internal clock
The TCSR[TE] bit is set to clear the counter and enable the timer. Clearing TCSR[TE]
disables the timer.
The value to which the timer is to count is loaded into the TCPR. (This is true for all
modes except the measurement modes (modes 4 through 6).
The counter is loaded with the TLR value on the first clock.
If the counter overflows, TCSR[TOF] is set, and if TCSR[TOIE] is set, an overflow
interrupt is generated.
You can read the counter contents at any time from the Timer Count Register (TCR).
To ensure proper operation, the TCSR TC[3–0] bits should be changed only when the
timer is disabled (that is, when TCSR[TE] is cleared).
TC2
Bit Settings
0
TC1
0
TC0
0
Mode
DSP56309 User’s Manual, Rev. 1
0
Name
GPIO
Mode Characteristics
Function
Timer
GPIO
TIO
Operating Modes
Internal
Clock
9-5