XC56309AG100A Freescale Semiconductor, XC56309AG100A Datasheet - Page 202

• Manufacturer Part Number: XC56309AG100A
• Description: IC DSP 24BIT 100MHZ 144-TQFP
• Manufacturer: Freescale Semiconductor
• Series: DSP563xxr
• Type: Fixed Pointr

Specifications of XC56309AG100A

• Interface: Host Interface, SSI, SCI
• Clock Rate: 100MHz
• Non-volatile Memory: ROM (576 B)
• On-chip Ram: 24kB
• Voltage - I/o: 3.30V
• Voltage - Core: 3.30V
• Operating Temperature: -40°C ~ 100°C
• Mounting Type: Surface Mount
• Package / Case: 144-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Triple Timer Module
9.3.1.4 Timer Event Counter (Mode 3)
In Mode 3, the timer counts external events and issues an interrupt (if interrupt enable bits are set)
when the timer counts a preset number of events. The timer clock signal can be taken from either
the TIO input signal or the prescaler clock output. If an external clock is used, it must be
internally synchronized to the internal clock, and its frequency must be less than the DSP56309
internal operating frequency divided by 4. The value of the TCSR[INV] bit determines whether
low-to-high (0 to 1) transitions or high-to-low (1 to 0) transitions increment the counter. If the
INV bit is set, high-to-low transitions increment the counter. If the INV bit is cleared,
low-to-high transitions increment the counter.
When the counter matches the value contained in the TCPR, TCSR[TCF] is set and a compare
interrupt is generated if the TCSR[TCIE] bit is set. If the TCSR[TRM] bit is set, the counter is
loaded with the value of the TLR when the next timer clock is received, and the count is resumed.
If the TCSR[TRM] bit is cleared, the counter continues to increment on each timer clock. This
process repeats until the timer is disabled.
9-10
TC3
0
Mode 3 (internal clock): TRM = 1
N = write preload
M = write compare
TE
Clock
(TIO pin or prescale CLK)
TLR
Counter (TCR)
TCPR
TCF (Compare Interrupt if TCIE = 1)
NOTE: If INV = 1, counter is clocked on 1-to-0 clock transitions, instead of 0-to-1 transitions.
TC2
Bit Settings
0
TC1
1
TC0
N
M
Figure 9-9. Event Counter Mode, TRM = 1
1
0
first event
Mode
DSP56309 User’s Manual, Rev. 1
3
N
Event Counter
Name
N + 1
Mode Characteristics
M
Function
Timer
N
if clock source
is from TIO pin,
TIO < CPUCLK + 4
interrupts every
M - N clock
periods
Freescale Semiconductor
Input
TIO
N + 1
External
Clock