20-101-0709 Rabbit Semiconductor, 20-101-0709 Datasheet - Page 13

• Manufacturer Part Number: 20-101-0709
• Description: INTERFACE GRAPHIC DISPLAY OP6700
• Manufacturer: Rabbit Semiconductor

Specifications of 20-101-0709

• Module/board Type: Single Board Computer Module
• For Use With/related Products: OP6700
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 20-101-709; 20-101-709

Connect the positive lead (indicated with red heat-shrink tubing on the AC adapter
included with the Tool Kit) to the PWR connector on header J7 on the Intellicom Board
and connect the negative lead to GND on header J7 as shown in Figure 2 and Figure 3.
4. Apply power.
Plug in the AC adapter. The Intellicom board is now ready to be used.
User’s Manual
3. Connect Power Supply to the Intellicom
First, prepare the AC adapter for the country
where it will be used by selecting the plug. The
Intellicom Tool Kit presently includes Can-
ada/Japan/U.S., Australia/N.Z., U.K., and Euro-
pean style plugs. Snap in the top of the plug
assembly into the slot at the top of the AC adapter
as shown in Figure 2, then press down on the
spring-loaded clip below the plug assembly to
allow the plug assembly to click into place.
Board
NOTE: A hardware RESET is accomplished by unplugging the AC adapter, then plug-
ging it back in.
CAUTION: Be careful to hook up the positive and negative power leads exactly as
described. Otherwise, the Intellicom board will not function.
Figure 3. Power Supply Connections—
Detailed View
9