EZ80190AZ050EG Zilog, EZ80190AZ050EG Datasheet - Page 26

• Manufacturer Part Number: EZ80190AZ050EG
• Description: IC WEBSERVER 50MHZ XTEMP 100LQFP
• Manufacturer: Zilog

Specifications of EZ80190AZ050EG

• Processor Type: eZ80
• Features: High Speed, Single-Cycle Instruction-Fetch
• Speed: 50MHz
• Voltage: 3.3V
• Mounting Type: Surface Mount
• Package / Case: 100-LQFP
• Processor Series: EZ80190x
• Core: eZ80
• Data Bus Width: 8 bit
• Program Memory Type: ROMLess
• Data Ram Size: 8 KB
• Interface Type: I2C, IrDA, SPI, UART
• Maximum Clock Frequency: 50 MHz
• Number Of Programmable I/os: 32
• Number Of Timers: 6
• Operating Supply Voltage: 3 V to 3.6 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: 0 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 269-3865; EZ80190AZ050EG

Table 1. 100-Pin LQFP Pin Identification of the eZ80190 Device (Continued)
PS006614-1208
Pin
No.
70
71
72
73
Symbol
PC3
SS1
CTS1
PC4
DTR1
PC5
DSR1
PC6
DCD1
Function
GPIO Port C
Slave Select
Clear to Send
GPIO Port C
Data Terminal
Ready
GPIO Port C
Data Set
Ready
GPIO Port C
Data Carrier
Detect
Signal Direction
Input/Output
Input, Active Low
Input, Active Low
Input/Output
Output, Active Low The DTR1 pin carries the modem-control signal to
Input/Output
Input, Active Low
Input/Output
Input, Active Low
Description
The PC3 pin can be used for GPIO. It can be
individually programmed as an input or output
and can also be used individually as an interrupt
input. Each Port C pin, when programmed as an
output, can be selected to be an open-drain or
open-source output. Port C is multiplexed with
one channel of the UZI interface.
The slave select input line is used to select a
slave device in SPI mode. This signal is
multiplexed with PC3.
The CTS1 pin carries the modem status signal to
the UART. This signal is multiplexed with PC3.
The PC4 pin can be used for GPIO. It can be
individually programmed as an input or output
and can also be used individually as an interrupt
input. Each Port C pin, when programmed as an
output, can be selected to be an open-drain or
open-source output. Port C is multiplexed with
one channel of the UZI interface.
the UART. This signal is multiplexed with PC4.
The PC5 pin can be used for GPIO. It can be
individually programmed as an input or output
and can also be used individually as an interrupt
input. Each Port C pin, when programmed as an
output, can be selected to be an open-drain or
open-source output. Port C is multiplexed with
one channel of the UZI interface.
The DSR1 pin carries the modem status signal to
the UART. This signal is multiplexed with PC5.
The PC6 pin can be used for GPIO. It can be
individually programmed as an input or output
and can also be used individually as an interrupt
input. Each Port C pin, when programmed as an
output, can be selected to be an open-drain or
open-source output. Port C is multiplexed with
one channel of the UZI interface.
The DCD1 pin carries the modem status signal to
the UART. This signal is multiplexed with PC6.
Product Specification
Architectural Overview
16