PEB2075N-V13TR Infineon Technologies, PEB2075N-V13TR Datasheet - Page 65

• Manufacturer Part Number: PEB2075N-V13TR
• Description: IC CONTROLLER D-CH EXCH 44-PLCC
• Manufacturer: Infineon Technologies

Specifications of PEB2075N-V13TR

• Controller Type: Digital Exchange Controller
• Interface: PCM
• Voltage - Supply: 4.75 V ~ 5.25 V
• Current - Supply: 10mA
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 44-PLCC
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: PEB2075N-V13INTR; PEB2075N-V13TR

Command Register (CMDR)
Value after reset: 00
7
RMC
RRES Receiver Reset.
RMD
XHF
FHF
XME
XRES Transmitter Reset.
Semiconductor Group
RMC
Receive Message Complete.
Reaction to RPF or RME internupt. The receive FIFO pool currently accessible by the
microcontroller is released for a subsequent frame (or 32-byte block of data).
The HDLC receiver is reset, the receive FIFO is cleared of any data.
Receive Message Delete.
Reaction to RPF or RME interrupt. The entire frame is to be ignored by the receiver. The
part of the frame already stored is discarded.
Transmit HDLC Frame.
Transmission of an HDLC frame (or of a block thereof) is initiated.
Force HDLC Frame.
Used in the master collision mode (CMS1,0 = 11). When this bit is set and a Transmit HDLC
Frame (XHF) command is issued, the controller aborts the frame from CDR (if any) by
sending seven 1’s on SD0X and then starts transmission. SD2X is set "low" to indicate that
no data will be accepted on CDR input data line.
Transmit Message End.
Indicates that the current transmit frame is to be closed with CRC and flag.
The HDLC transmitter is reset, XFIFO is cleared of any data and the HDLC frame currently
being transmitted (if any) is aborted.
RRES
H
RMD
X
Address: Base + 21/28
65
XHF
FHF
H
(Base + 11
Register Description
XME
H
)
Write
XRES
0