ICS1893AFT IDT, Integrated Device Technology Inc, ICS1893AFT Datasheet - Page 18

• Manufacturer Part Number: ICS1893AFT
• Description: PHYCEIVER LOW PWR 3.3V 48-SSOP
• Manufacturer: IDT, Integrated Device Technology Inc
• Series: PHYceiver™r
• Type: PHY Transceiverr

Specifications of ICS1893AFT

• Protocol: MII
• Voltage - Supply: 3.14 V ~ 3.47 V
• Mounting Type: Surface Mount
• Package / Case: 48-SSOP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Number Of Drivers/receivers: -
• Other names: 1893AFT; 800-1920-2; ICS1893AFT

Chapter 5 Operating Modes Overview
ICS1893AF, Rev D 10/26/04
The ICS1893AF operating modes are typically controlled from software.
The ICS1893AF register bits are accessible through a standard MII (Media Independent Interface) Serial
Management Port.
The ICS1893AF is configured to support the MAC Interface as a 10M MII or a 100M MII. The protocol on
the Medium Dependent Interface (MDI) can be configured to support either 10M or 100M operations in
either half-duplex or full-duplex modes.
The ICS1893AF is fully compliant with the ISO/IEC 8802-3 standard, as it pertains to both 10Base-T and
100Base-TX operations. The feature-rich ICS1893AF allows easy migration from 10-Mbps to 100-Mbps
operations as well as from systems that require support of both 10M and 100M links.
This chapter is an overview of the following ICS1893AF modes of operation:
•
•
•
•
•
•
•
Section 5.1, “Reset Operations”
Section 5.2, “Power-Down Operations”
Section 5.3, “Automatic Power-Saving Operations”
Section 5.4, “Auto-Negotiation Operations”
Section 5.5, “100Base-TX Operations”
Section 5.6, “10Base-T Operations”
Section 5.7, “Half-Duplex and Full-Duplex Operations”
ICS1893AF Data Sheet - Release
Copyright © 2004, Integrated Circuit Systems, Inc.
All rights reserved.
18
Chapter 5 Operating Modes Overview
October, 2004