SLXT915QC.B3 Intel, SLXT915QC.B3 Datasheet - Page 13

• Manufacturer Part Number: SLXT915QC.B3
• Description: IC QUAD ETHERNET REPEATER 64-QFP
• Manufacturer: Intel
• Type: Repeaterr

Specifications of SLXT915QC.B3

• Rohs Status: RoHS non-compliant
• Tx/rx Type: Ethernet
• Voltage - Supply: 4.75 V ~ 5.25 V
• Current - Supply: 240mA
• Mounting Type: Surface Mount
• Package / Case: 64-QFP
• Delay Time: -
• Capacitance - Input: -
• Lead Free Status / Rohs Status: Not Compliant
• Other names: 831529

2.4
Datasheet
Figure 3. Global State Machine
Collin(ANYXM) = SQE
Collin(ONLY1) = SQE *
TT(ALL) 96:[M Port(Collin = SQE)]
TRANSMIT COLLISION
Initialization
The following description applies to the initial power-on reset and to any subsequent hardware
reset. When a reset occurs (RESET pin pulled high for > 1 ms), the device senses the levels at the
various control pins (
and the IRB.
Collin(ALL) = SQE * TT(ALL) 96 * Tw2Done
Out (All) = Jam
Out (ALLXM) = Jam
ONE PORT LEFT
Collin(ANYXN) = SQE
Collin(ANYXN) = SQE
Datain(M) = II*
Collin(ALL) = SQE*
Tw2Done
Collin(ANYXN) = SQE
Power On
Datain(ANY) = II * Collin(ALL) = SQE:[N Port(Datain = II)]
TT(ALLXN)
TwoOnesSent * Collin(ALL) = SQE * Datain(N) = II
Table 3
Out (ALLXN) = Preamble Pattern
SEND PREAMBLE PATTERN
62 * DataRdy * Collin(ALL) = SQE * Datain(N) = II
Out (ALLXN) = TwoOnes
and
Out (ALLXN) = Data
SEND TWO ONES
Table
Out(ALL) = Idle
Out (ALL) = Idle
SEND DATA
StartTw1
UCT
START
WAIT
Begin
IDLE
4) to determine the correct operating modes for the LEDs
Datain(N) = II *
Collin(ALL) = SQE *
TT(ALLXN)
AllDataSent
Collin(ANY) = SQE + Tw1Done
Collin(ANYXN) = SQE
Intel
Collin(N) = SQE + Datain(N) = II *
Collin(ALL) = SQE *
AllDataSent * TT(ANAYXN) < 96
Collin(N) = SQE + Datain = II * Collin(ALL) = SQE
®
LXT915 Simple Quad Ethernet Repeater
96 *
Collin(N) = SQE + Datain(N) = II * Collin (ALL) = SQE
Collin(ANY) = SQE[N Port(Collin = SQE)]
II = input_idle (no activity)
II = activity
RECEIVE COLLISION
Out (ALLXN) = Jam
Datain(N) = II *
Collin(ALL) = SQE *
TT(ALLXN)
Tw2Done
96 *
13