AN983BLX-BG-T-V1 Infineon Technologies, AN983BLX-BG-T-V1 Datasheet - Page 8

• Manufacturer Part Number: AN983BLX-BG-T-V1
• Description: IC PCI TO ETHERNET LAN 128-FQFP
• Manufacturer: Infineon Technologies

Specifications of AN983BLX-BG-T-V1

• Applications: Ethernet Controller
• Interface: USB
• Voltage - Supply: 3 V ~ 3.6 V
• Package / Case: 128-BFQFP
• Mounting Type: Surface Mount
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: AN983BLXBGTV1; SP000076446

1
The AN983B/BX is a high performance PCI Fast Ethernet controller with a integrated physical layer interface for
10BASE-T and 100BASE-TX applications. The AN983BX is the environmentally friendly “green” package version.
The AN983B/BX was designed with advanced CMOS technology to provide a glueless 32-bit bus master interface
for PCI, boot ROM interface, and CSMA/CD protocol for Fast Ethernet, as well as the physical media interface for
100BASE-TX of IEEE802.3u and 10BASE-T of IEEE802.3. The auto-negotiation function is also supported for
speed and duplex detections.
The AN983B/BX can be programmed as MAC-only controller. In this mode, it provides the standard MII interface
to link to an external PHY. With this mode, it can be connected to the HomePNA PHY to support the HomePNA
networking solution or Homeplug PHY (Power-line solution) to support Homeplug networking solution.
The AN983B/BX provides both half-duplex and full-duplex operations, as well as supports for full-duplex flow
control.
It provides long FIFO buffers for transmission and reception, and an early interrupt mechanism to enhance
performance.
The AN983B/BX also supports ACPI and PCI compliant power management functions and Magic Packet wake-
up event.
2
Figure 1
3
Industry standard
•
Data Sheet
IEEE802.3u 100BASE-TX and IEEE802.3 10BASE-T compliant
General Description
System Block Diagram
System Diagram of the AN983B/BX
Features
EEPROM
25MHz
Crystal
AN983B
Boot ROM
LEDs
8
RJ-45
Rev. 1.81, 2005-12-15
General Description
AN983B/BX