STM32F101V8 STMicroelectronics, STM32F101V8 Datasheet - Page 20

• Manufacturer Part Number: STM32F101V8
• Description: Mainstream Access line, ARM Cortex-M3 MCU with 64 Kbytes Flash, 36 MHZ CPU
• Manufacturer: STMicroelectronics

Specifications of STM32F101V8

• Peripherals Supported: timers, ADC, SPIs, I2Cs and USARTs
• Conversion Range: 0 to 3.6 V
• Systick Timer: 24-bit downcounter

Description
2.3.24
2.3.25
20/87
An analog watchdog feature allows very precise monitoring of the converted voltage of one,
some or all selected channels. An interrupt is generated when the converted voltage is
outside the programmed thresholds.
Temperature sensor
The temperature sensor has to generate a voltage that varies linearly with temperature. The
conversion range is between 2 V < V
connected to the ADC_IN16 input channel which is used to convert the sensor output
voltage into a digital value.
Serial wire JTAG debug port (SWJ-DP)
The ARM SWJ-DP Interface is embedded, and is a combined JTAG and serial wire debug
port that enables either a serial wire debug or a JTAG probe to be connected to the target.
The JTAG TMS and TCK pins are shared respectively with SWDIO and SWCLK and a
specific sequence on the TMS pin is used to switch between JTAG-DP and SW-DP.
Doc ID 13586 Rev 14
DDA
< 3.6 V. The temperature sensor is internally
STM32F101x8, STM32F101xB