STEF05 STMicroelectronics, STEF05 Datasheet - Page 8

• Manufacturer Part Number: STEF05
• Description: Electronic fuse for 5 V line
• Manufacturer: STMicroelectronics

Specifications of STEF05

• Continuous Current (typ): 3.6 A
• N-channel On-resistance (typ): 40 mΩ
• Output Clamp Voltage (typ): 6.65 V
• Thermal Latch (typ): 165 °C

Typical application
5
5.1
5.1.1
8/20
Typical application
Figure 3.
Figure 4.
Operating modes
Turn-on
When the input voltage is applied, the Enable/Fault pin goes up to the high state, enabling
the internal control circuitry.
After an initial delay time of typically 500 µs, the output voltage is supplied with a slope
defined by the internal dv/dt circuitry. If no additional capacitor is connected to dv/dt pin, the
total time from the Enable signal going high and the output voltage reaching the nominal
value is around 1 ms (refer to
Application circuit
Typical HDD application circuit
Doc ID 019055 Rev 4
Figure 5, 15
).
AM09868v1
AM09869v1
STEF05