HMP8116 Intersil Corporation, HMP8116 Datasheet - Page 17

• Manufacturer Part Number: HMP8116
• Description: Ntsc/pal Video Decoder
• Manufacturer: Intersil Corporation

Odd and Even WSS
WSS data present on line 20 (or line 17 or 23 in the PAL
modes) is captured into a shift register then transferred to
the WSS_ODD_A and WSS_ODD_B registers. WSS data
present on line 283 (or line 280 or 336 in the PAL modes) is
captured into a shift register then transferred to the
WSS_EVEN_A and WSS_EVEN_B registers.
The WSS odd field Read status bit is set to “1” after data has
been transferred from the shift register to the WSS_ODD_A
and WSS_ODD_B registers. It is set to “0” after the data has
been read out.
The WSS even field Read status bit is set to “1” after data
has been transferred from the shift register to the
WSS_EVEN_A and WSS_EVEN_B registers. It is set to “0”
after the data has been read out.
BT.656 ANCILLARY DATA
Through the BT.656 interface the HMP8116 can generate
non-active video data which contains CC, WSS, teletext or
NOTES:
29. ep = even parity for P8-P13.
30. CRC = Sum of P8-P14 of Data ID through last user data word. Preset to all zeros, carry is ignored.
NOTES:
27. BT.656 VBI ancillary starts with a 00H, FFH and FFH sequence which is opposite to the SAV/EAV sequence of FFH, 00H and 00H.
28. During active VBI data intervals, DVALID is deasserted and BLANK is asserted.
VBIVALID
P[15-8]
Data Block Number
CLK
Data Word Count
PIXEL OUTPUT
Caption Data
Preamble
Data ID
CRC
FIGURE 16. OUTPUT TIMING FOR BT.656 VBI DATA TRANSFERS (CC, WSS, TELETEXT, RTCI)
TABLE 5. READING THE CLOSED CAPTION DATA AS BT.656 ANCILLARY DATA
t
DVLD
P15
P14
P14
P14
P14
P14
P14
P14
P14
0
1
1
00
P14
bit 6
ep
ep
ep
ep
ep
ep
ep
0
1
1
FF
bit 5
P13
0
1
1
1
0
0
0
0
0
0
FF
HMP8116
17
DATA ID
bit 4
P12
Real-Time Control Interface (RTCI) information. Teletext and
RTCI data is only available as BT.656 ancillary data.
VBIVALID OUTPUT TIMING
The VBIVALID output is asserted when outputting closed
captioning, widescreen signalling, teletext or RTCI data as
BT.656 ancillary data. It is asserted during the entire BT.656
ancillary data packet time, including the preamble.
BT.656 CLOSED CAPTIONING AND WIDE SCREEN
SIGNALLING
Table 5 illustrates the format when outputting the caption
data registers as BT.656 ancillary data. The ancillary data is
present during the horizontal blanking interval after the line
containing the captioning information.
Table 6 illustrates the format when outputting the WSS data
registers as BT.656 ancillary data. The ancillary data is
present during the horizontal blanking interval after the line
containing the WSS information.
0
1
1
1
0
0
0
0
0
0
BLK #
bit 15
bit 11
bit 7
bit 3
bit 3
P11
0
1
1
0
0
0
# BYTES/4
bit 14
bit 10
bit 6
bit 2
bit 2
P10
0
1
1
0
0
0
BYTE #1
bit 13
bit 9
bit 5
bit 1
bit 1
P9
0
1
1
0
0
0
BYTE #2
1 = even field data
0 = odd field data
BYTE #3
bit 12
bit 8
bit 4
bit 0
bit 0
P8
0
1
1
1
1
BYTE #4