NBB-302 RF Micro Devices, NBB-302 Datasheet - Page 3

• Manufacturer Part Number: NBB-302
• Description: Cascadable Broadband Gaas Mmic Amplifier Dc To 12 Ghz Nbb-302
• Manufacturer: RF Micro Devices

Rev A6 DS060124
Pin
1
2
3
4
5
6
7
8
9
Function
RF OUT
RF IN
GND
GND
GND
GND
GND
GND
GND
Notes:
1. Solder pads are coplanar to within ±0.025 mm.
2. Lid will be centered relative to frontside metallization with a tolerance of ±0.13 mm.
3. Mark to include two characters and dot to reference pin 1.
Description
Ground connection. For best performance, keep traces physically short
and connect immediately to ground plane.
Same as pin 1.
Same as pin 1.
RF input pin. This pin is NOT internally DC blocked. A DC blocking capacitor,
suitable for the frequency of operation, should be used in most applica-
tions. DC coupling of the input is not allowed, because this will override the
internal feedback loop and cause temperature instability.
Same as pin 1.
Same as pin 1.
Same as pin 1.
RF output and bias pin. Biasing is accomplished with an external series
resistor and choke inductor to V
current into this pin to a desired level. The resistor value is determined by
the following equation:
Care should also be taken in the resistor selection to ensure that the cur-
rent into the part never exceeds maximum datasheet operating current
over the planned operating temperature. This means that a resistor
between the supply and this pin is always required, even if a supply near
5.0V is available, to provide DC feedback to prevent thermal runaway.
Alternatively, a constant current supply circuit may be implemented.
Because DC is present on this pin, a DC blocking capacitor, suitable for the
frequency of operation, should be used in most applications. The supply
side of the bias network should also be well bypassed.
Same as pin 1.
R
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at ([phone] or [e-mail].
=
3.28 max
1.91 max
2.94 min
2.59 max
Indicator
1.70 min
2.39 min
N3
Lid ID
Pin 1
(
------------------------------------------ -
V
CC
–
I
V
CC
DEVICE
0.38 nom
Package Drawing
All Dimensions in Millimeters
)
1.50 max
1.00 min
CC
. The resistor is selected to set the DC
0.125 max
0.025 min
Indicator
RF OUT
Ground
Pin 1
0.37 min
0.63 max
0.50 nom
0.50 nom
0.98 min
1.02 max
Interface Schematic
RF IN
Ground
RF IN
NBB-302
RF OUT
3 of 8