D63711 NEC, D63711 Datasheet - Page 54

• Manufacturer Part Number: D63711
• Description: Search -----> UPD63711
• Manufacturer: NEC

www.DataSheet4U.com
3.4 CD-TEXT Function
(1) Parameter format
[Functional description]
A[4:0]:
SZ:
M[1:0]:
54
MSB
M1
Remark The mark * indicates the contents set after a reset.
Inputs the parameters at the TSI pin in the format shown below. Command input is not necessary.
Specifies the readout data address within Pack.
If SZ = 0, specify an address from 0H to 11H.
If SZ = 1, specify an address from 0H to 17H.
If A[4:0] = 18H, output correction results information.
Selects 6/8 conversion of readout data.
“0”
“1”
Use SZ = 0 as needed to read a MODE = 2 (program area) data area. In other cases, use SZ = 1.
Sets the decoding mode.
If M1 = 1, specify the interleave mode in the M0 bit.
“00” Determines the presence of interleaving in a program area using Item of 3 bits and performs automatic
“01” Specifies MODE = 4 (Lead in Area). Only CRC checking is performed and not correction.
“10” No de-interleaving
“11” Has de-interleaving
M0
There is 6/8 conversion.
There is no 6/8 conversion.
de-interleaving.
SZ
A4
Parameter
A3
Preliminary Product Information S14470EJ1V1PM00
A2
A1
LSB
A0
M1
SZ
0
1
0
0
1
1
A[4:0]
6/8 conversion
None (output 6-bit data justified on the LSB
side)
M0
0
1
0
1
Readout Data Output Format Selection
Interleave autocheck decode
mode
Specifies MODE = 4
(Lead in Area)
No interleave decoding
Interleave decoding command
CD-TEXT Data Processing
Readout Data Address
Method
PD63711
MODE
2
4
2
2