txn31015d2 Intel Corporation, txn31015d2 Datasheet - Page 18

no-image

txn31015d2

Manufacturer Part Number
txn31015d2
Description
Quad-rate 850 Nm Optical Transceiver - Sff* Msa Compatible
Manufacturer
Intel Corporation
Datasheet
6.0
6.1
Note:
Intel
Datasheet
18
®
TXN31015D2 Quad-Rate 850 nm Optical Transceiver - SFF* MSA Compatible
Digital Diagnostic Monitoring Interface
This section includes the following topics:
Overview of Digital Diagnostic Monitoring Interface
The TXN31015D2 Optical Transceiver supports the 2-wire serial communication
protocol. The TXN31015D2 Optical Transceiver has a digital diagnostic monitoring
interface that is an extension of the serial ID interface defined in the Gigabit Interface
Converter (GBIC) specification and the SFF Transceiver MultiSource Agreement (MSA)
referenced in
For details on the 2-wire addresses A0h and A2h, refer to the SFF-8472 document
referenced in
• Standard SFF serial ID interface. The standard SFF serial ID interface (the
• Digital diagnostic monitoring interface. The digital diagnostic monitor interface
Section 6.1, “Overview of Digital Diagnostic Monitoring Interface” on page 18
Section 6.2, “General Memory Map Descriptions” on page 19
Section 6.3, “Alarm and Warning Fields for 2-Wire I nterface Address A2h” on
page 20
Section 6.4, “A/D Fields for 2-Wire Interface Address A2h” on page 22
memory map for which is in
Descriptions” on page
bit address 1010000X (A0h). The serial identification information describes
information such as the following for the TXN31015D2 Optical Transceiver:
capabilities, standard interfaces, and manufacturer information.
(the memory map for which is in
Descriptions” on page
interface, which uses the 8-bit address 1010001X (A2h) reserved for optical
transceivers, allows real-time access to device-operating parameters while leaving
unchanged the original serial ID memory map A0h. The digital diagnostic
monitoring interface is backward compatible with both the GBIC specification and
the SFF MSA.
Section 1.0, “Introduction” on page
Section 1.0, “Introduction” on page
In tel
®
TXN31015D2 Quad-Rate 850 nm Optical Transceiver - SFF* MSA Compatible
19) provides access to identification information using the 8-
19) is an extension of the standard serial ID interface. This
T able 12, “Memory Map – 2-Wire Address Range
T able 12, “Memory Map – 2-Wire Address Range
7.
7.
Order Number: 316366, Revision: 001US
18-April-2007

Related parts for txn31015d2