mc68hc08az60 Freescale Semiconductor, Inc, mc68hc08az60 Datasheet - Page 319

• Manufacturer Part Number: mc68hc08az60
• Description: M68hc08 Family Of 8-bit Microcontroller Units Mcus
• Manufacturer: Freescale Semiconductor, Inc

Interrupt
Acknowledge
Interrupt Vectors
15-mscan
MOTOROLA
NOTE:
Interrupts are directly associated with one or more status flags in either
the MSCAN08 receiver flag register (CRFLG) or the MSCAN08
transmitter flag register (CTFLG). Interrupts are pending as long as one
of the corresponding flags is set. The flags in the above registers must
be reset within the interrupt handler in order to handshake the interrupt.
The flags are reset through writing a ‘1’ to the corresponding bit position.
A flag cannot be cleared if the respective condition still prevails.
Bit manipulation instructions (BSET) shall not be used to clear interrupt
flags.
The MSCAN08 supports four interrupt vectors as shown in
vector addresses and the relative interrupt priority are dependent on the
chip integration and to be defined.
Freescale Semiconductor, Inc.
For More Information On This Product,
MSCAN Controller (MSCAN08)
Table 1. MSCAN08 Interrupt Vector Addresses
Function
Interrupts
Transmit
Receive
Wakeup
Go to: www.freescale.com
Error
RWRNIF
TWRNIF
RERRIF
TERRIF
BOFFIF
Source
OVRIF
WUPIF
TXE0
TXE1
TXE2
RXF
RWRNIE
TWRNIE
RERRIE
TERRIE
BOFFIE
TXEIE0
TXEIE1
TXEIE2
OVRIE
WUPIE
RXFIE
Local
Mask
MSCAN Controller (MSCAN08)
MC68HC08AZ60 — Rev 1.0
Global
Mask
I Bit
Table
Interrupts
1. The
319