ak4569 AKM Semiconductor, Inc., ak4569 Datasheet - Page 23

no-image

ak4569

Manufacturer Part Number
ak4569
Description
20-bit Stereo Codec With Ipga & Hp-amp
Manufacturer
AKM Semiconductor, Inc.
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
ak4569VN-L
Manufacturer:
AKM
Quantity:
20 000
ASAHI KASEI
2) DAC → HP-amp
Power supply voltage for headphone amp is supplied from HVDD pin and centered on VCOM. Load resistance of
headphone output is min.20Ω. When PMHPL and PMHPR bit are “0”, headphone amplifiers are powered-down
perfectly. Then HPL and HPR pins are fixed to “L” (HVSS) and a capacitor of MUTET pin works to avoid pop noise.
(1) PDN pin should be set to “H” at least 150ns after the power is supplied.
(2) HPLMT, HPRMT and PMVCM bits should be changed to “1” after PDN pin goes to “H”.
(3) PMDAC, PMHPL, PMHPR bits should be changed to “1” and HPLMT, HPRMT bits should be changed to “0” after
(4) External clocks (MCLK, BICK, LRCK) are needed to operate DAC. When PMDAC bit = “0”, these clocks can be
(5) Rise time of headphone amp is determined by external capacitor of MUTET pin. When C=1µF,
(6) Fall time of headphone amp is determined by output capacitor for AC coupling. When C=100µF,
(7) Analog output corresponding to digital input has the group delay (GD) of 16.8/fs(=381µs@fs=44.1kHz).
(8) ATS bit sets transition time of digital attenuator. Default value is 1061/fs(=24ms@fs=44.1kHz).
(9) Power supply should be switched off after headphone amp is powered down (HPL/R pins become “L”).
MS0292-E-01
HPLMT, HPRMT, PMVCM bits are changed to “1”. Once PMHPL and PMHPR bits are changed to “1”, HPLMT
and HPRMT bits should be inverted from PMHPL and PMHPR bits respectively.
stopped. Headphone amp can operate without these clocks.
Clock Input
PMDAC bit
DAC Internal
SDTI pin
PMHPL/R bit
ATTL/R7-0 bit
HPL/R pin
Power Supply
PDN pin
PMVCM bit
HPLMT,
HPRMT bit
State
Don’t care
(1)
>150ns
00H(MUTE)
PD
(2) >0
Figure 18. Power-up/down sequence of DAC and HP-amp
Rise Time Constant of Headphone Amp: τ = 100ms
Fall Time Constant of Headphone Amp: τ = 200ms
(5)
(3) >0
(4)
(7) GD
Normal Operation
FFH(0dB)
(8) 1061/fs
(7) (8)
- 23 -
(6)
00H(MUTE)
Don’t care
PD
(5)
Normal Operation
(7) (8)
FFH(0dB)
(7)
00H(MUTE)
(8)
(6)
PD
[AK4569]
(9)
2005/07

Related parts for ak4569