AK4358_06 AKM [Asahi Kasei Microsystems], AK4358_06 Datasheet - Page 23

• Manufacturer Part Number: AK4358_06
• Description: 192kHz 24-Bit 8ch DAC with DSD Input
• Manufacturer: AKM [Asahi Kasei Microsystems]

ASAHI KASEI
When RSTN=0, DAC is powered down but the internal register values are not initialized. The analog outputs go to
VCOM voltage and DZFL/DZFR pins go to “H”. Figure 16 shows the example of reset by RSTN bit.
Notes:
MS0203-E-01
Reset Function
(1) The analog output corresponding to digital input has the group delay (GD).
(2) Analog outputs go to VCOM voltage.
(3) Click noise occurs at the edges(“ ↑ ↓ ”) of the internal timing of RSTN bit. This noise is output even if “0” data
(4) The external clocks (MCLK, BICK and LRCK) can be stopped in the reset mode (RSTN = “L”).
(5) DZF pins go to “H” when the RSTN bit becomes “0”, and go to “L” at 2/fs after RSTN bit becomes “1”.
(6) There is a delay, 3~4/fs from RSTN bit “0” to the internal RSTN bit “0”, and 2~3/fs from RSTN bit “1” to the
Internal
D/A In
D/A Out
Clock In
MCLK,LRCK,BICK
RSTN bit
Internal
RSTN bit
DZF
is input.
internal RSTN “1”.
(Digital)
(Analog)
State
Normal Operation
(1)
Figure 16. Reset Sequence Example
GD
(3)
Digital Block Power-down
- 23 -
3~4/fs (6)
“0” data
(4)
Don’t care
(2)
(3)
2~3/fs (6)
2/fs(5)
Normal Operation
GD
(1)
[AK4358]
2006/02