EVAL-ADM1030 AD [Analog Devices], EVAL-ADM1030 Datasheet - Page 13

• Manufacturer Part Number: EVAL-ADM1030
• Description: Evaluation Board for ACPI Temperature Monitor and PWM Fan Controller
• Manufacturer: AD [Analog Devices]

EVAL-ADM1030/31
Preliminary Technical Data
SAVING TO FILE
This window allows the user to save all the ADM1030/31
data to an Microsoft
Excel File. The following data is
saved
1.Local Temperature
2.Remote Temperature, channel 1
3.Fan Speed, channel 1, in RPM
4.Channel 1, PWM Duty Cycle
5.Remote Temperature, channel 2
6.Fan Speed, channel 2, in RPM
7.Channel 2, PWM Duty Cycle
To begin saving this data to an Excel file first click on
“Make New Log”. A Windows “Open File” window
should open. Choose a name for the log and then click
“Open”. The software will then begin saving the above
values to the Excel file. The user can also control how often
these values are stored to the Excel file by changing the
value written in the “Delay(Sec)” window. This value
represents the time in seconds between successive saves. To
stop saving to the Excel file the user should click on the
“Logging to file” button.
SAVE/RECALL
This window allows the user to save all the current values in
the device to a .txt file. Click on “Save Register Values”.
This causes the Register Contents Window to be displayed.
Click on “Set File Path” command. The Windows “Open”
Window is then displayed. Choose a filename and Click
“Open”. Then Click on “Save” in the “Register Contents
Window”. This allows a register dump for easy writing of
BIOS Software.
This window also allows the user to program all the
registers with a previously saved set of values. This is
achieved using the “Recall Previous Setup” Command.
Click on “Recall Previous Setup” and choose the .txt
filename of a previous set of register values. Then Click on
“Open”. These previous values are written to the registers.
REV. PrA
–13–