EVAL-ADM1030 AD [Analog Devices], EVAL-ADM1030 Datasheet - Page 7

• Manufacturer Part Number: EVAL-ADM1030
• Description: Evaluation Board for ACPI Temperature Monitor and PWM Fan Controller
• Manufacturer: AD [Analog Devices]

THE SOFTWARE
The software allows the ADM1030/31’s functions to be
controlled from the PC via an easy to use interface
operating under the Windows
contents of the device’s internal registers can easily be
read or altered through a user-friendly graphics interface,
while the control center window allows the graphing of the
temperature readings.
INSTALLING THE SOFTWARE
To install the software insert the Analog Devices
ADM1030/31 CD-ROM into the CD-ROM Drive. The
CD-ROM should autorun and start installing the software.
If this does not occur then the user should click on the
Start Icon and then on Run Icon and type X:setup.exe as
the file name, where X is the drive letter of the CD-ROM
drive. To finish installing the software follow the
on-screen instructions.
USING THE SOFTWARE
When using the software, first ensure that the evaluation
board is connected to the Parallel Printer Port and that the
power supply is plugged into the board.
To start the Software, select Start-Programs-Analog
Devices- ADM1030/31 Evaluation Software.
When the program is selected the Software Initialisation
Wizard will appear first.
Click on “Next” to go to the next screen, which will
allow the user to choose between connecting the
evaluation board via the printer port, via the SMBus or via
USB. However the USB option is not available on this
revision of the evaluation board and so should not be
selected.
REV. PrA
Preliminary Technical Data
environment. The
–7–
Once the Communications medium has been selected,
click on “Next” to go to the next screen. When you are
ready for the evaluation software to begin searching for the
device on the chosen medium, click on “Next”.
The software will search for the ADM1030 or ADM1031
and if it finds it the following screen will appear.
Click on “Yes” if this is the ADM1030 or ADM1031 you
wish to use. The next screen should then appear.
EVAL-ADM1030/31