MS400 EXTECH [Extech Instruments Corporation.], MS400 Datasheet - Page 27

• Manufacturer Part Number: MS400
• Description: Handheld Digital Storage Oscilloscope & Multimeter
• Manufacturer: EXTECH [Extech Instruments Corporation.]

Making a Capacitance Measurement
To measure a capacitance:
Making a DC Voltage Measurement
Making a AC Voltage Measurement
1 . Press the R key and R appears on the top of
2. Press the AUTO SET key till C appears at the
3. Insert the capacitor into the square jack and the
Note: When the measured value is less than 5nF,
To measure a DC voltage, do the following:
1. Press the V key and DCV appears at the top of
2. Insert the black lead into the COM banana jack
3. Connect the red and black test leads to the
To measure AC voltage:
1. Press the V key and DCV appears at the top
2. Press the AUTO SET key and ACV appears at
3. Insert the black lead into the COM banana
4. Connect the red and black test leads to the
the screen
top of the screen.
screen will show the capacitance reading.
use the low capacitance mode of the multimeter
and the relative value measuring mode to
improve measurement precision. If the
capacitance measurement is larger than 40uF
the calculation will take about thirty seconds.
input and the red lead into the V/Ω banana jack
input.
measurement points and the measured voltage
value will display on the screen.
of the screen.
the top of the screen.
jack input and the red lead into the V/Ω
banana jack input.
measurement points and the AC voltage value
will be displayed on the screen.
the screen.
27
Figure 24: Capacitance Measurement
Figure 26: AC Voltage Measurement.
Figure 25: DC Voltage Measurement
MS400 Version 2.0 – December 2007