MS400 EXTECH [Extech Instruments Corporation.], MS400 Datasheet - Page 39

• Manufacturer Part Number: MS400
• Description: Handheld Digital Storage Oscilloscope & Multimeter
• Manufacturer: EXTECH [Extech Instruments Corporation.]

XY Mode
The waveform saving /recalling menu is described in the following list.
To save a waveform on CH1 in address A:
To display the saved Waveform:
Waveform Saving Setup
Function
menu
Signal
source
Address
Saving
Addresses
A,
and D
Press the F4 key to select Start for address A. The Waveform saved in address A will
be displayed on the screen in green and the zero point of Waveform k, voltage and
time, will be purple
With the XY mode selected, CH1 is displayed on the horizontal axis and CH2
displayed on the vertical axis. When the oscilloscope is in a sampling mode in which
no trigger is found, the data appear as light spots.
Operation of various control keys:
■ CH1 Volts and CH1 Zero for CH1 are used to set the horizontal scale and
■ CH2 Volts and CH2 Zero for CH2 are used to set the vertical scale and position.
The following functions do not work in the XY display mode:
■ Reference or digital value waveform
■ Cursor
■ Auto Setting
■ Time base control
■ Trigger control
The oscilloscope can save four (4) Waveforms all of which can be displayed on the
screen with the present Waveform. The recalled Waveform saved in the memory
cannot be adjusted.
1. Press the MENU key; the function menu will appear at the right of the screen.
2. Press the MENU UP or MENU DOWN key to select Wave Save. Four selectable
3. Press the F1 key to select the signal source CH1.
4. Press the F2 key to select the Address A.
5. Press the F3 key to save the CH1 Waveform in Address A.
position.
items are displayed at the bottom of the screen.
B,
C
Setups
CH1
CH2
MATH
A, B, C and
D
Close
Start
Description
Select the displayed Waveform to save.
Select the address for saving or recalling a
Waveform.
Store the Waveform of a selected signal source into
the selected address.
Close or start displaying the Waveforms stored in
address A, B, C or D.
39
MS400 Version 2.0 – December 2007