HT68F14 HOLTEK [Holtek Semiconductor Inc], HT68F14 Datasheet - Page 135

• Manufacturer Part Number: HT68F14
• Description: Enhanced I/O Flash Type MCU
• Manufacturer: HOLTEK [Holtek Semiconductor Inc]

SWAP [m]
Description
Operation
Affected flag(s)
SWAPA [m]
Description
Operation
Affected flag(s)
SZ [m]
Description
Operation
Affected flag(s)
SZA [m]
Description
Operation
Affected flag(s)
SZ [m].i
Description
Operation
Affected flag(s)
TABRDC [m]
Description
Operation
Affected flag(s)
Rev. 1.10
Swap nibbles of Data Memory
The low-order and high-order nibbles of the specified Data Memory are interchanged.
[m].3~[m].0
None
Swap nibbles of Data Memory with result in ACC
The low-order and high-order nibbles of the specified Data Memory are interchanged.
The result is stored in the Accumulator. The contents of the Data Memory remain un-
changed.
ACC.3 ~ ACC.0
ACC.7 ~ ACC.4
None
Skip if Data Memory is 0
If the contents of the specified Data Memory is 0, the following instruction is skipped.
As this requires the insertion of a dummy instruction while the next instruction is
fetched, it is a two cycle instruction. If the result is not 0 the program proceeds with the
following instruction.
Skip if [m] = 0
None
Skip if Data Memory is 0 with data movement to ACC
The contents of the specified Data Memory are copied to the Accumulator. If the value is
zero, the following instruction is skipped. As this requires the insertion of a dummy in-
struction while the next instruction is fetched, it is a two cycle instruction. If the result is
not 0 the program proceeds with the following instruction.
ACC
Skip if [m] = 0
None
Skip if bit i of Data Memory is 0
If bit i of the specified Data Memory is 0, the following instruction is skipped. As this re-
quires the insertion of a dummy instruction while the next instruction is fetched, it is a
two cycle instruction. If the result is not 0, the program proceeds with the following in-
struction.
Skip if [m].i = 0
None
Read table (current page) to TBLH and Data Memory
The low byte of the program code (current page) addressed by the table pointer (TBLP)
is moved to the specified Data Memory and the high byte moved to TBLH.
[m]
TBLH
None
program code (low byte)
[m]
program code (high byte)
[m].7 ~ [m].4
[m].7 ~ [m].4
[m].3 ~ [m].0
135
Enhanced I/O Flash Type MCU
HT68F13/HT68F14/HT68F15
February 9, 2011