S9S12G240F0CLFR Freescale Semiconductor, S9S12G240F0CLFR Datasheet - Page 555

• Manufacturer Part Number: S9S12G240F0CLFR
• Description: 16-bit Microcontrollers - MCU 16BIT 240KB FLASH
• Manufacturer: Freescale Semiconductor

Specifications of S9S12G240F0CLFR

• Rohs: yes
• Core: S12
• Processor Series: MC9S12G
• Data Bus Width: 16 bit
• Maximum Clock Frequency: 25 MHz
• Program Memory Size: 240 KB
• Data Ram Size: 4 KB
• On-chip Adc: Yes
• Operating Supply Voltage: 3.13 V to 5.5 V
• Operating Temperature Range: - 40 C to + 125 C
• Package / Case: LQFP-48
• Mounting Style: SMD/SMT

Freescale Semiconductor
Reserved
ETRIGLE
ACMPIE
ETRIGP
ETRIGE
ASCIE
AFFC
Field
6
5
4
3
2
1
0
ATD Fast Flag Clear All
0 ATD flag clearing done by write 1 to respective CCF[n] flag.
1 Changes all ATD conversion complete flags to a fast clear sequence.
Do not alter this bit from its reset value.It is for Manufacturer use only and can change the ATD behavior.
External Trigger Level/Edge Control — This bit controls the sensitivity of the external trigger signal. See
Table 16-7
External Trigger Polarity — This bit controls the polarity of the external trigger signal. See
External Trigger Mode Enable — This bit enables the external trigger on one of the AD channels or one of the
ETRIG3-0 inputs as described in
input buffer of this channel is enabled. The external trigger allows to synchronize the start of conversion with
external events.
0 Disable external trigger
1 Enable external trigger
ATD Sequence Complete Interrupt Enable
0 ATD Sequence Complete interrupt requests are disabled.
1 ATD Sequence Complete interrupt will be requested whenever SCF=1 is set.
ATD Compare Interrupt Enable — If automatic compare is enabled for conversion n (CMPE[n]=1 in ATDCMPE
register) this bit enables the compare interrupt. If the CCF[n] flag is set (showing a successful compare for
conversion n), the compare interrupt is triggered.
0 ATD Compare interrupt requests are disabled.
1 For the conversions in a sequence for which automatic compare is enabled (CMPE[n]=1), an ATD Compare
For compare disabled (CMPE[n]=0) a read access to the result register will cause the associated CCF[n] flag
to clear automatically.
For compare enabled (CMPE[n]=1) a write access to the result register will cause the associated CCF[n] flag
to clear automatically.
Interrupt will be requested whenever any of the respective CCF flags is set.
for details.
ETRIGLE
0
0
1
1
Table 16-7. External Trigger Configurations
MC9S12G Family Reference Manual, Rev.1.23
Table 16-6. ATDCTL2 Field Descriptions
Table
ETRIGP
16-5. If the external trigger source is one of the AD channels, the digital
0
1
0
1
Description
External Trigger Sensitivity
Falling edge
Rising edge
High level
Low level
Analog-to-Digital Converter (ADC12B16CV2)
Table 16-7
for details.
557