STM8S105K6T3CTR STMicroelectronics, STM8S105K6T3CTR Datasheet - Page 13

• Manufacturer Part Number: STM8S105K6T3CTR
• Description: 8-bit Microcontrollers - MCU 8-bit MCU Access 16 MHz 32kb Flash
• Manufacturer: STMicroelectronics

Specifications of STM8S105K6T3CTR

• Product Category: 8-bit Microcontrollers - MCU
• Rohs: yes
• Core: STM8
• Data Bus Width: 8 bit

STM8S105xx
4.5
The UBC area remains write-protected during in-application programming. This means that
the MASS keys do not unlock the UBC area. It protects the memory used to store the boot
program, specific code libraries, reset and interrupt vectors, the reset routine and usually the
IAP and communication routines.
Read-out protection (ROP)
The read-out protection blocks reading and writing the Flash program memory and data
EEPROM memory in ICP mode (and debug mode). Once the read-out protection is activated,
any attempt to toggle its status triggers a global erase of the program and data memory. Even
if no protection can be considered as totally unbreakable, the feature provides a very high
level of protection for a general purpose microcontroller.
Clock controller
The clock controller distributes the system clock (f
to the core and the peripherals. It also manages clock gating for low power modes and ensures
clock robustness.
Features
•
•
•
•
Clock prescaler: To get the best compromise between speed and current consumption
the clock frequency to the CPU and peripherals can be adjusted by a programmable
prescaler.
Safe clock switching: Clock sources can be changed safely on the fly in run mode
through a configuration register. The clock signal is not switched until the new clock source
is ready. The design guarantees glitch-free switching.
Clock management: To reduce power consumption, the clock controller can stop the
clock to the core, individual peripherals or memory.
Master clock sources: Four different clock sources can be used to drive the master
clock:
-
-
1-16 MHz high-speed external crystal (HSE)
Up to 16 MHz high-speed user-external clock (HSE user-ext)
Medium density
Flash program memory
(up to 32 Kbytes)
Data
EEPROM
memory
Figure 2: Flash memory organisation
DocID14771 Rev 12
Remains write protected during IAP
Write access possible for IAP
Data memory area ( 1 Kbyte)
Program memory area
Option bytes
UBC area
MASTER
) coming from different oscillators
(2 first pages) up to
Programmable area
from 1 Kbyte
32 Kbytes
(1 page steps)
Product overview
13/124