EA-QSB-015 Embedded Artists, EA-QSB-015 Datasheet - Page 17

• Manufacturer Part Number: EA-QSB-015
• Description: Development Boards & Kits - ARM QUICK START BOARD LPC11U35
• Manufacturer: Embedded Artists

Specifications of EA-QSB-015

• Rohs: yes
• Product: Development Kits
• Tool Is For Evaluation Of: LPC11U35
• Core: ARM Cortex M0
• Interface Type: USB
• Operating Supply Voltage: 3.3 V

Copyright 2012 © Embedded Artists AB
LPC11U35 QuickStart Board - User’s Guide
C:\nxp\lpcxpresso_4.2\bin\checksum.exe –p lpc11U35 –v s_demo.bin
For details, see LPC11U35 User’s Manual [2] from NXP as well as AN10986 [4] (application note from
NXP).
1. Build the application in the LPCXpresso IDE.
2. Right-click on the generated axf file, go to the Binary Utilities menu and select Create binary.
3. Open a command prompt in the directory containing the axf file. This can be done from the
4. Update the binary file with a correct checksum. In the example below it is assumed that you
5. A USB cable (mini-B to A) must be connected between a computer (i.e., PC) and the USB
6. Press down the bootload push-button (SW2) and then press and release the reset push-
7. Open the Mass storage device and there will be a file named
8. Reset the board (SW1 push-button) and the (just downloaded) application will start executing.
See Figure 6.
Utilities menu, see Figure 7.
are using LPCXpresso IDE 4.2 installed in
are using a LPC11U35 and the binary file is named
interface (J3 on the LPC11U35 QuickStart Board).
button (SW1) on the LPC11U35 QuickStart Board. A storage device named CRP DISABLD
will now appear on your computer, see Figure 8.
then copy the file created in step 4 above to the CRP DISABLD drive.
C:\nxp\lpcxpresso_4.2
s_demo.bin
firmware.bin
.
. It is also assumed that you
. Delete this file and
Page 17