WIZ120SR-EVB WIZnet, WIZ120SR-EVB Datasheet - Page 11

• Manufacturer Part Number: WIZ120SR-EVB
• Description: Interface Development Tools EVALUATION BOARD FOR WIZ120SR
• Manufacturer: WIZnet
• Type: Serial to Ethernetr

Specifications of WIZ120SR-EVB

• Rohs: yes
• Product: Evaluation Boards
• Tool Is For Evaluation Of: WIZ120SR
• Interface Type: Ethernet, RS-232
• Operating Supply Voltage: 5 V
• Dimensions: 110 mm x 60 mm
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Operating Supply Current: 200 mA

2. Getting Started
2.1 Hardware Installation Procedure
For the testing, the module and test board should be prepared.
2.2 Configuration Tool
2.2.1. Network Configurations
① Version : Displays the firmware version.
② Enable Serial Debug Mode : If this mode is enabled, you can monitor the status and socket
messages of WIZ120SR (listen OK, connect fail etc.) through the serial terminal. In this mode,
WIZ120SR User‟s Manual (WIZnet, Inc.)




☞ Be careful of connecting the JP1 on the module to the correct JP1 on the test
board.
STEP1:
STEP2:
or LAN port of PC with network cable.
STEP3:
STEP4:
Insert the WIZ120SR module into the sockets on the test board.
Connect the DB9 jack of WIZ120SR and serial device with RS-232 serial line.
Connect the 5V (500mA) DC power adaptor to the WIZ120SR test board.
Connect the RJ-45 connector of WIZ120SR test board to the Ethernet hub
Figure 2. Configuration Tool (Network Configuration)
5