MD2533-D8G-X-P SanDisk, MD2533-D8G-X-P Datasheet - Page 46

• Manufacturer Part Number: MD2533-D8G-X-P
• Description: IC MDOC H3 8GB FBGA
• Manufacturer: SanDisk

Specifications of MD2533-D8G-X-P

• Format - Memory: FLASH
• Memory Type: FLASH - Nand
• Memory Size: 8G (1G x 8)
• Interface: Parallel
• Voltage - Supply: 1.65 V ~ 1.95 V, 2.5 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 115-LFBGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Speed: -

Note: 1. This register cannot be accessed when the A0 signal is pulled high. Therefore it is
7.3.10 Download Control Register
Description:
Address (hex): 9406 (128KB window) / 1406 (8KB window)
Type:
Note: This register cannot be accessed when the A0 signal is pulled high. Therefore it is
7.3.11 IPL Control Register
Description:
Address (hex): 9408 (128KB window) / 1408 (8KB window)
Type:
46
Bit number
Read/Write
Bit name
Reset value
DOWNLOAD_RUN
Read/Write
Bit name
Reset value
CLOSE_IPL_CS Enables the host to shut down part or whole of mDOC H3 XIP block.
Bit number
2. Burst mode can only be used in conjunction with mDOC H3 DMA functionality.
recommended that A0 will be connected to Host CPU A0, or to VSS.
recommended that A0 will be connected to Host CPU A0, or to VSS.
D15-D1
R
RFU
0
D15-D6
R
RFU
0
This 16-bit register provides the status of IPL download from flash to internal
boot block.
Host can poll this register after reset until DOWNLOAD_RUN is cleared.
Read Only
This 16-bit register controls the IPL window.
Read / Write
This feature is used after the boot has finished, saving power
Is IPL downloading in progress?
0: Download process was completed.
1: Download process is still in progress
D5-D4
R/W
CLOSE_IPL_CS
0
Data Sheet (Preliminary) Rev. 0.2
D3-D2
R
RFU
0
D1
R/W
IPL_WR_EN
0
D0
R
DOWNLOAD_RUN
1
mDOC H3 Embedded Flash Drive
D0
R
IPL_WR_RDY
0
92-DS-1205-10